EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Influence of an alternating magnetic field on weld formation and defects during laser beam welding

Fan Yang, Xiangmeng Meng, Pablo Pusbatzkies, Paul-Florian Kroll, Marcel Bachmann, Michael Rethmeier

Journal of Laser Applications · 01.11.2026 · 38 (4)

DOI: 10.2351/7.0002172 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Laser Applications, online erschienen am 18.11.2026. Verfasst von Fan Yang und 5 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Deutsche Forschungsgemeinschaft.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Contactless magnetohydrodynamic technology has been proposed as a promising approach to optimizing the quality of laser beam welds. In this study, the effects of alternating magnetic field on weld morphology, surface roughness, and porosity in laser beam welding were systematically investigated using experiments and a numerical model coupled with multiphysics. The results show that increasing magnetic flux density reduces the surface roughness along the weld centerline, although undercut is aggravated. Meanwhile, the weld width increases while the penetration depth decreases. Numerical results indicate that these changes are mainly caused by the enhanced outward flow of molten metal on the upper surface of the weld pool, with only minor changes in laser heat input and weld pool volume under different magnetic flux densities. Joule heating induced by the alternating magnetic field was also quantified and was shown to be negligible. In addition, the porosity ratio decreases significantly with increasing magnetic flux density, with a maximum reduction of 94.2%. The porosity suppression is mainly attributed to the time-averaged downward Lorentz force. Compared with magnetic field frequency, magnetic flux density plays a more important role in porosity suppression within the investigated frequency range.

Förderung

  • Deutsche Forschungsgemeinschaft

Zitieren

APA

Yang, F., Meng, X., Pusbatzkies, P., Kroll, P., Bachmann, M., & Rethmeier, M. (2026). Influence of an alternating magnetic field on weld formation and defects during laser beam welding. Journal of Laser Applications, 38(4). https://doi.org/10.2351/7.0002172

Vancouver

Yang F, Meng X, Pusbatzkies P, Kroll P, Bachmann M, Rethmeier M. Influence of an alternating magnetic field on weld formation and defects during laser beam welding. Journal of Laser Applications. 2026;38(4). doi:10.2351/7.0002172

BibTeX
@article{Yang2026,
  author = {Yang, Fan and Meng, Xiangmeng and Pusbatzkies, Pablo and Kroll, Paul-Florian and Bachmann, Marcel and Rethmeier, Michael},
  title = {Influence of an alternating magnetic field on weld formation and defects during laser beam welding},
  journal = {Journal of Laser Applications},
  year = {2026},
  volume = {38},
  number = {4},
  doi = {10.2351/7.0002172}
}
Kostenlos starten →