Laser-assisted additive manufacturing for copper nanoparticle metallization in photovoltaics
Journal of Laser Applications · 01.08.2026 · 38 (3)
DOI: 10.2351/7.0002087 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Laser Applications, online erschienen am 18.08.2026. Verfasst von Quang Hao Nguyen und 5 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Gefördert von: U.S. Department of Energy.
Abstract (Originalsprache)
Copper is increasingly considered for next-generation microarchitectured solar cells due to its unique photovoltaic and cost characteristics. Laser-assisted additive manufacturing enables cost-effective, scalable route for copper metallization with localized energy input, and minimal thermal damage to underlying device layers. In this study, high concentrations of copper nanoparticle suspensions (75–85 wt. %) were prepared and deposited on indium tin oxide-coated silicon heterojunction solar cells, followed by a two-step CO2 laser process consisting of drying and selective sintering. A tailored thermal model, incorporating the thermophysical and optical properties of each material, was used to guide the optimal laser conditions for both steps. Processing and structure property relationships were evaluated through SEM imaging and four-point-probe measurements. Laser-sintered lines showed improved densification and conductivity compared with thermally annealed counterparts, indicating that localized laser energy enables more effective neck growth and reduced lateral spreading. The results highlight a promising pathway toward high-precision, low-thermal damage metallization for advanced solar-cell architectures and provide a foundation for further optimization of laser-based cooper processing.
Förderung
- U.S. Department of Energy
Zitieren
APA
Nguyen, Q. H., Castillo-Orozco, E., Bougdid, Y., Davis, K., Kumar, R., & Kar, A. (2026). Laser-assisted additive manufacturing for copper nanoparticle metallization in photovoltaics. Journal of Laser Applications, 38(3). https://doi.org/10.2351/7.0002087
Vancouver
Nguyen QH, Castillo-Orozco E, Bougdid Y, Davis K, Kumar R, Kar A. Laser-assisted additive manufacturing for copper nanoparticle metallization in photovoltaics. Journal of Laser Applications. 2026;38(3). doi:10.2351/7.0002087
BibTeX
@article{Nguyen2026,
author = {Nguyen, Quang Hao and Castillo-Orozco, Eduardo and Bougdid, Yahya and Davis, Kristopher and Kumar, Ranganathan and Kar, Aravinda},
title = {Laser-assisted additive manufacturing for copper nanoparticle metallization in photovoltaics},
journal = {Journal of Laser Applications},
year = {2026},
volume = {38},
number = {3},
doi = {10.2351/7.0002087}
}
EUVIMED