Effect of off-axis laser incidence on residual stress in laser-based directed energy deposition of 316L stainless steel
Journal of Laser Applications · 01.05.2026 · 38 (2)
DOI: 10.2351/7.0002036 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Laser Applications, online erschienen am 02.03.2026. Verfasst von Andre Hatem und 8 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 43 Literaturangaben. Gefördert von: Australian Research Council.
Abstract (Originalsprache)
Residual stress limits dimensional accuracy and service performance in the Laser-based Directed Energy Deposition (DED-LB) of 316L stainless steel. Process-integrated mitigation was demonstrated using off-axis (oblique-incidence) laser delivery. A 20 mm-thick multilayer build was characterized by neutron diffraction, neutron tomography, electron backscatter diffraction (EBSD), and Vickers macrohardness mapping. Residual stresses were confined to ±100 MPa, with interior tension and surface-adjacent compression; neutron tomography measured ∼0.001% porosity for pores ≥50 μm. Hardness of 150–230 HV20 colocated with compressive zones, and EBSD showed elongated columnar grains with position-dependent texture. The reduced stress state is attributed to the enlarged projected footprint and lower peak irradiance of off-axis delivery, which spread heat laterally, reduce the thermal gradient (G) and cooling rate (T˙), and favor conduction-mode melting. These results establish off-axis DED-LB as a route to in situ residual-stress control and microstructural tailoring while maintaining negligible resolved porosity in additively manufactured 316L components. The bulk, through-thickness maps and datasets provide component-scale validation to calibrate models and support process qualification.
Förderung
- Australian Research Council
Zitieren
APA
Hatem, A., Roccisano, A., Schulz, C., Schlaefer, T., Luzin, V., Salvemini, F., Meghwal, A., Ang, A. S. M., & Hall, C. (2026). Effect of off-axis laser incidence on residual stress in laser-based directed energy deposition of 316L stainless steel. Journal of Laser Applications, 38(2). https://doi.org/10.2351/7.0002036
Vancouver
Hatem A, Roccisano A, Schulz C, Schlaefer T, Luzin V, Salvemini F, et al. Effect of off-axis laser incidence on residual stress in laser-based directed energy deposition of 316L stainless steel. Journal of Laser Applications. 2026;38(2). doi:10.2351/7.0002036
BibTeX
@article{Hatem2026,
author = {Hatem, Andre and Roccisano, Anthony and Schulz, Christiane and Schlaefer, Thomas and Luzin, Vladimir and Salvemini, Filomena and Meghwal, Ashok and Ang, Andrew Siao Ming and Hall, Colin},
title = {Effect of off-axis laser incidence on residual stress in laser-based directed energy deposition of 316L stainless steel},
journal = {Journal of Laser Applications},
year = {2026},
volume = {38},
number = {2},
doi = {10.2351/7.0002036}
}
EUVIMED