EUVIMEDEUVIMED entdecken
Crossref

Statistical modeling and optimization of clad geometry in laser cladding of Amdry 961 on Inconel 713LC superalloy with response surface methodology

Mahya Hajiahmadi, Ali Khorram, Majid Ghoreishi

Journal of Laser Applications · 01.05.2024 · 36 (2)

DOI: 10.2351/7.0001364 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Laser Applications, online erschienen am 06.05.2024. Verfasst von Mahya Hajiahmadi und 2 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 29 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, Inconel 713LC superalloy was laser-clad with Amdry 961 powder using a 1 kW fiber laser. Response surface methodology was used to investigate the effect of laser power, duty cycle, and scanning speed on the deposited bead's geometry (width, height, and clad angle) and the dilution ratio. Interestingly, higher laser power and duty cycle increased bead width, clad angle, and dilution ratio but decreased bead height, while the opposite effect was observed for scanning speed. The process optimization was performed by a simultaneous optimization technique. This technique identified the ideal parameters: a laser power of 840 W, a duty cycle of 79.5%, and a scanning speed of 4.38 mm/s. These settings effectively optimized clad properties, with mean absolute errors of 7.96% for clad width, 14.74% for clad height, 16.71% for clad angle, and 5.166% for dilution ratio. These values demonstrate the precision of optimized parameter settings.

Zitieren

APA

Hajiahmadi, M., Khorram, A., & Ghoreishi, M. (2024). Statistical modeling and optimization of clad geometry in laser cladding of Amdry 961 on Inconel 713LC superalloy with response surface methodology. Journal of Laser Applications, 36(2). https://doi.org/10.2351/7.0001364

Vancouver

Hajiahmadi M, Khorram A, Ghoreishi M. Statistical modeling and optimization of clad geometry in laser cladding of Amdry 961 on Inconel 713LC superalloy with response surface methodology. Journal of Laser Applications. 2024;36(2). doi:10.2351/7.0001364

BibTeX
@article{Hajiahmadi2024,
  author = {Hajiahmadi, Mahya and Khorram, Ali and Ghoreishi, Majid},
  title = {Statistical modeling and optimization of clad geometry in laser cladding of Amdry 961 on Inconel 713LC superalloy with response surface methodology},
  journal = {Journal of Laser Applications},
  year = {2024},
  volume = {36},
  number = {2},
  doi = {10.2351/7.0001364}
}
Kostenlos starten →