EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Laser fusion cutting: The missing link between gas dynamics and cut edge topography

Madlen Borkmann, Achim Mahrle, Andreas Wetzig

Journal of Laser Applications · 01.11.2023 · 35 (4)

DOI: 10.2351/7.0001103 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Laser Applications, online erschienen am 22.09.2023. Verfasst von Madlen Borkmann und 2 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In laser cutting, the fundamental role of the gas flow for melt removal and kerf formation is generally accepted. Beyond this vague understanding, however, the underlying physical mechanisms are not yet fully understood. In particular, detailed data concerning the momentum and heat transfer between the gas and melt have seldom been reported. This study addresses the local interactions between the cutting gas and kerf surface (melt film surface) in a fundamental way based on a combined experimental, theoretical, and numerical approach. Typical solid-state laser cut edges are analyzed considering the characteristic surface structures and the basic influences of the gas flow on the global and local melt movement. Here, apparent structures in the micrometer range indicate the effect of vortical gas structures close to the wall. Theoretical investigation of the gas boundary layer is conducted by semiempirical equations and the transfer of basic results from the boundary layer theory. It is shown that the boundary layer is in transition between the laminar and turbulent flow, and local flow separations and shock-boundary layer interactions primarily induce spatially periodic and quasistationary instability modes. An improved numerical model of the cutting gas flow confirms the theoretical results and exhibits good agreement with experimental cut edges, reproducing relevant instability modes and quantifying the local momentum and heat transfer distributions between the gas and melt. With the knowledge gained about the underlying physical mechanisms, promising approaches for improvements of the fusion cutting performance are proposed.

Zitieren

APA

Borkmann, M., Mahrle, A., & Wetzig, A. (2023). Laser fusion cutting: The missing link between gas dynamics and cut edge topography. Journal of Laser Applications, 35(4). https://doi.org/10.2351/7.0001103

Vancouver

Borkmann M, Mahrle A, Wetzig A. Laser fusion cutting: The missing link between gas dynamics and cut edge topography. Journal of Laser Applications. 2023;35(4). doi:10.2351/7.0001103

BibTeX
@article{Borkmann2023,
  author = {Borkmann, Madlen and Mahrle, Achim and Wetzig, Andreas},
  title = {Laser fusion cutting: The missing link between gas dynamics and cut edge topography},
  journal = {Journal of Laser Applications},
  year = {2023},
  volume = {35},
  number = {4},
  doi = {10.2351/7.0001103}
}
Kostenlos starten →