Cutting thick aluminum plates using laser fusion cutting enhanced by dynamic beam shaping
Journal of Laser Applications · 01.11.2023 · 35 (4)
DOI: 10.2351/7.0001095 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Laser Applications, online erschienen am 20.11.2023. Verfasst von Masoud Kardan und 3 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 22 Literaturangaben.
Abstract (Originalsprache)
Cutting thick plates is affected not only by the laser power but also by the cut kerf width and the melt flow dynamics that determine the ejection of the molten material. Employing the same laser beam intensity distribution for various thicknesses is the limiting factor when cutting thicker plates. This paper investigates fiber laser fusion cutting of 25 mm thick aluminum with dynamic beam shaping (DBS). While both static and longitudinal dynamic intensity distributions fail to cut this thickness with a 4 kW laser power, a cut through is achieved using annular and elliptical intensity distributions. However, an improvement of 45% in cutting speed can be achieved using an elliptical intensity distribution compared to an annular one. In order to understand the effect of the beam shape, an infrared thermal camera is used to study lateral heat propagation when using different process parameters. Moreover, to analyze the melt flow when changing the DBS frequency, high-speed imaging is utilized to observe the molten material inside the cut kerf. Finally, the cut edge quality is investigated for different cutting conditions.
Zitieren
APA
Kardan, M., Levichev, N., Castagne, S., & Duflou, J. R. (2023). Cutting thick aluminum plates using laser fusion cutting enhanced by dynamic beam shaping. Journal of Laser Applications, 35(4). https://doi.org/10.2351/7.0001095
Vancouver
Kardan M, Levichev N, Castagne S, Duflou JR. Cutting thick aluminum plates using laser fusion cutting enhanced by dynamic beam shaping. Journal of Laser Applications. 2023;35(4). doi:10.2351/7.0001095
BibTeX
@article{Kardan2023,
author = {Kardan, Masoud and Levichev, Nikita and Castagne, Sylvie and Duflou, Joost R.},
title = {Cutting thick aluminum plates using laser fusion cutting enhanced by dynamic beam shaping},
journal = {Journal of Laser Applications},
year = {2023},
volume = {35},
number = {4},
doi = {10.2351/7.0001095}
}
EUVIMED