EUVIMEDEUVIMED entdecken
Crossref

A Coupled Thermo-Mechanical and Simulation-Driven Framework for Rolling Resistance Tire Prediction

Dario Dotolo, Heron Dionisio, Dario Garofano, Ciro Esposito

Tire Science And Technology · 18.09.2026

DOI: 10.2346/tst-26-008 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Tire Science And Technology, erschienen am 18.09.2026. Verfasst von Dario Dotolo und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Accurate prediction of rolling resistance (RR) in tires is fundamental to improve fuel efficiency and reduce CO 2 emissions in the commercial transportation industry. Traditional viscoelastic material models natively available in commercial finite element (FE) software typically fail to capture the complex, nonlinear dependence of material behavior on strain amplitude, frequency, and temperature. This limitation leads to a significant gap between simulated and experimental RR values, particularly under real operating conditions where rubber compounds experience large deformations, wide temperature gradients, and strain-amplitude–dependent hysteresis effects (Payne effect). To overcome these constraints, this study introduces a comprehensive simulation-driven framework that bridges laboratory material characterization and full-scale tire thermal simulations. Steady-state rolling FE analysis is used to extract representative local strain amplitudes, dominant deformation modes, and frequency spectra, dictating the design of targeted dynamic mechanical analysis shear tests. Several constitutive approaches were benchmarked, demonstrating that although the advanced three network model captures amplitude-dependent dissipation successfully, its computational cost is prohibitive for full-tire applications. Consequently, a decoupled approach is proposed, using a dynamic Bergström–Boyce formulation combined with the slow decay law of the Mullins effect to secure macroscopic structural stiffness. The hysteresis calculation is decoupled and evaluated via a customized Python-based tool implementing the phenomenological Kraus model over the extracted kinematic strain histories. This tool computes local mechanical energy dissipation and heat generation rates, feeding an iterative thermo-mechanical FE loop to predict internal temperature distributions. The simulated temperature maps show strong correlation with experimentally measured data from an indoor testing campaign using thermal cameras and embedded thermistors. The methodology shows high potential for application to both symmetric and real treaded tires, providing a promising, highly scalable predictive tool for RR performance optimization, although its general applicability requires further validation across diverse tire configurations.

Zitieren

APA

Dotolo, D., Dionisio, H., Garofano, D., & Esposito, C. (2026). A Coupled Thermo-Mechanical and Simulation-Driven Framework for Rolling Resistance Tire Prediction. Tire Science And Technology. https://doi.org/10.2346/tst-26-008

Vancouver

Dotolo D, Dionisio H, Garofano D, Esposito C. A Coupled Thermo-Mechanical and Simulation-Driven Framework for Rolling Resistance Tire Prediction. Tire Science And Technology. 2026. doi:10.2346/tst-26-008

BibTeX
@article{Dotolo2026,
  author = {Dotolo, Dario and Dionisio, Heron and Garofano, Dario and Esposito, Ciro},
  title = {A Coupled Thermo-Mechanical and Simulation-Driven Framework for Rolling Resistance Tire Prediction},
  journal = {Tire Science And Technology},
  year = {2026},
  doi = {10.2346/tst-26-008}
}
Kostenlos starten →