EUVIMEDEUVIMED entdecken
Crossref

Effects of UV Postcuring Times on the Color Stability, Surface Properties and Conversion of 3D-printed Temporary Resin Composites

L C de Sousa, Alc Pereira, Mrs Curinga, Bbtlc de Souza, Aud Batista, Bcd Borges, Afp Carreiro

Operative Dentistry · 2024

DOI: 10.2341/24-004-l ↗

Kurz gefasst

Fachartikel in der Zeitschrift Operative Dentistry, 2024. Verfasst von L C de Sousa und 6 weiteren Autor:innen. Beteiligte Einrichtung: Lucas Cavalcante de Sousa, DDS, Department of Dentistry, Federal University of Rio Grande do Norte (UFRN), Lagoa Nova, Natal, Rio Grande do Norte, Br…. Hauptthemen laut MEDLINE: Surface Properties, Composite Resins, Printing, Three-Dimensional, Ultraviolet Rays. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 30 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective

To evaluate the effects of UV postcuring times on color stability (CS), surface properties (wettability [°] and surface roughness [Ra]), and conversion of 3D-printed resins for temporary restorations.

Methods

Disc-shaped specimens (10.0×3.0 mm) and maxillary central incisors (8.2×10.3 mm) were fabricated using provisional 3D-printed resin (PriZma Bio Prov [PZ] and PrintaX AA TEMP [PX]) in A2 shade and subjected to UV postcure times of 0 (T0), 5 (T1), 10 (T2), and 15 (T3) minutes (n=15). The incisors were used for CS evaluation with a colorimeter. In contrast, discs were used to measure the contact angle using the sessile drop method, surface roughness with an optical profilometer, and degree of conversion with FT-NIR. For CS, Ra, contact angle, and degree of conversion, a two-way ANOVA with Bonferroni post-hoc test (α=0.05) was used.

Results

PX resin demonstrated greater color stability than PZ ( p =0.001). Long UV postcuring times (10 to 15 minutes) will increase the contact angle ( p =0.013) and stabilize the degree of conversion ( p =0.01), while 5 to 10 minutes of UV postcuring will provide better surface smoothness ( p =0.04) of both resins.

Conclusions

Long UV postcuring times (10 to 15 minutes) lead to greater alterations in color, contact angle, and stability of the degree of conversion, while 5 to 10 minutes lead to a smoother surface of the 3D-printed temporary resins.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Surface PropertiesComposite ResinsPrinting, Three-DimensionalUltraviolet RaysColorDental Restoration, TemporaryHumansTime FactorsMaterials TestingDental MaterialsWettability

Substanzen

Composite ResinsDental Materials

Autor:innen und Institutionen

  • Lucas Cavalcante de Sousa, DDS, Department of Dentistry, Federal University of Rio Grande do Norte (UFRN), Lagoa Nova, Natal, Rio Grande do Norte, Brazil.
  • Ana Larisse Carneiro Pereira, DDS, MSc, Department of Dentistry, Federal University of Rio Grande do Norte (UFRN), Lagoa Nova, Natal, Rio Grande do Norte, Brazil.
  • Míria Rafaelli Souza Curinga, DDS, MSc, Department of Dentistry, Federal University of Rio Grande do Norte (UFRN), Lagoa Nova, Natal, Rio Grande do Norte, Brazil.
  • Bárbara Beatriz Teixeira Lima Cardoso de Souza, DDS, MSc, Department of Dentistry, Federal University of Rio Grande do Norte (UFRN), Lagoa Nova, Natal, Rio Grande do Norte, Brazil.
  • André Ulisses Dantas Batista, DDS, MSc, PhD, Department of Restorative Dentistry, Federal University of Paraíba (UFPB), Campus I, Castelo Branco, João Pessoa, Paraíba, Brazil.
  • Boniek Castillo Dutra Borges, DDS, MSc, PhD, Department of Dentistry, Federal University of Rio Grande do Norte (UFRN), Lagoa Nova, Natal, Rio Grande do Norte, Brazil.

Zitieren

APA

de Sousa, L. C., Pereira, A., Curinga, M., de Souza, B., Batista, A., Borges, B., & Carreiro, A. (2024). Effects of UV Postcuring Times on the Color Stability, Surface Properties and Conversion of 3D-printed Temporary Resin Composites. Operative Dentistry. https://doi.org/10.2341/24-004-l

Vancouver

de Sousa LC, Pereira A, Curinga M, de Souza B, Batista A, Borges B, et al. Effects of UV Postcuring Times on the Color Stability, Surface Properties and Conversion of 3D-printed Temporary Resin Composites. Operative Dentistry. 2024. doi:10.2341/24-004-l

BibTeX
@article{deSousa2024,
  author = {de Sousa, L C and Pereira, Alc and Curinga, Mrs and de Souza, Bbtlc and Batista, Aud and Borges, Bcd and Carreiro, Afp},
  title = {Effects of UV Postcuring Times on the Color Stability, Surface Properties and Conversion of 3D-printed Temporary Resin Composites},
  journal = {Operative Dentistry},
  year = {2024},
  doi = {10.2341/24-004-l}
}
Kostenlos starten →