EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Pull-off bond strength of orthodontic molar bands cemented to enamel with novel calcium silicate, glass ionomer, and zinc phosphate cement

Mariantonietta Leo, Ishan El Khadery, Michel Dalstra, Dirk Leonhardt, Bahram Ranjkesh, Henrik Løvschall

Biomaterial Investigations in Dentistry · 24.06.2026 · 13 · 508-513

DOI: 10.2340/biid.v13.46290 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomaterial Investigations in Dentistry, online erschienen am 24.06.2026. Verfasst von Mariantonietta Leo und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Clinical Sciences and translational Medicine, Tor Vergata University of Rome, Rome, Italy. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aim

This in vitro study compared the pull‑off bond strength of orthodontic molar bands cemented to enamel using a novel fast‑setting and bioactive calcium silicate cement (CSC), a glass ionomer cement (GIC), and a zinc phosphate cement after 1 month of storage in phosphate‑buffered saline (PBS). Materials and Methods: Ninety extracted human molars were randomly allocated to three groups and fitted with orthodontic molar bands. Bands were cemented using a novel fast‑setting CSC (Protooth), a GIC (Orthocem B), or a zinc phosphate cement (DeTrey Zinc) according to manufacturers’ instructions. After storage in PBS for 28 days, band debonding was performed using a universal testing machine in a wire‑loop pull‑off configuration at a cross‑head speed of 1 mm/min. The maximum load at failure was divided by the band surface area to calculate pull‑off bond strength (MPa). Data were analyzed using the Kruskal–Wallis test followed by pairwise Mann–Whitney U tests with Holm–Bonferroni correction (α = 0.05).

Results

The median pull‑off bond strength of the CSC was 1.22 MPa (interquartile range [IQR]: 0.93–1.34 MPa), which was significantly higher than that of the GIC 0.50 MPa (IQR: 0.33–0.79 MPa; p < 0.05). No statistically significant difference was observed between the CSC and zinc phosphate cement 0.92 MPa (IQR: 0.61–1.23 MPa; p ≥ 0.05). All specimens exhibited similar failure modes, with less than 30 % cement remaining on enamel following debonding.

Conclusions

Within the limitations of this in vitro study, the novel fast‑setting CSC demonstrated pull‑off bond strength similar to zinc phosphate cement and significantly higher than GIC after 1 month of storage in PBS. Further studies are required to evaluate the clinical performance and long‑term behavior of this material.

Schlagwörter

Stichwörter der Autor:innen

Calcium silicate cementdental biomaterialsin vitroorthodontic bandspull‑off bond strength

Autor:innen und Institutionen

  • Department of Clinical Sciences and translational Medicine, Tor Vergata University of Rome, Rome, Italy.
  • Department of Dentistry and Oral Health, Aarhus University-Health, Aarhus, Denmark.

Zitieren

APA

Leo, M., Khadery, I. E., Dalstra, M., Leonhardt, D., Ranjkesh, B., & Løvschall, H. (2026). Pull-off bond strength of orthodontic molar bands cemented to enamel with novel calcium silicate, glass ionomer, and zinc phosphate cement. Biomaterial Investigations in Dentistry, 13, 508-513. https://doi.org/10.2340/biid.v13.46290

Vancouver

Leo M, Khadery IE, Dalstra M, Leonhardt D, Ranjkesh B, Løvschall H. Pull-off bond strength of orthodontic molar bands cemented to enamel with novel calcium silicate, glass ionomer, and zinc phosphate cement. Biomaterial Investigations in Dentistry. 2026;13:508-513. doi:10.2340/biid.v13.46290

BibTeX
@article{Leo2026,
  author = {Leo, Mariantonietta and Khadery, Ishan El and Dalstra, Michel and Leonhardt, Dirk and Ranjkesh, Bahram and Løvschall, Henrik},
  title = {Pull-off bond strength of orthodontic molar bands cemented to enamel with novel calcium silicate, glass ionomer, and zinc phosphate cement},
  journal = {Biomaterial Investigations in Dentistry},
  year = {2026},
  volume = {13},
  pages = {508--513},
  doi = {10.2340/biid.v13.46290}
}
Kostenlos starten →