Effect of fluoride toothpastes on surface roughness of nickel–titanium wires: an in vitro study
Biomaterial Investigations in Dentistry · 22.05.2026 · 13 · 425-429
DOI: 10.2340/biid.v13.46087 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomaterial Investigations in Dentistry, online erschienen am 22.05.2026. Verfasst von Karen Lisette Vega Bravo und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Health Sciences University of the Hemispheres, Quito, Ecuador. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Objective
The main objective of this in vitro study was to determine the effect of toothbrushing with fluoride and natural fluoride-free toothpastes on surface roughness changes of nickel-titanium (NiTi) wires as an indirect indicator of corrosion-related surface degradation. Materials and Methods: Thirty rectangular superelastic NiTi wires (0.019 × 0.025”, 20 mm length; Orthometric) were randomly assigned to three groups (n = 10 each): Group 1 – fluoride toothpaste with brushing; Group 2 – fluoride toothpaste without brushing; Group 3 – fluoride-free toothpaste with brushing. Brushing was simulated with an electric toothbrush twice daily for 1 min over 28 days (cumulative 1 h). Initial and final surface roughness (Rz, µm) was measured using a portable roughness tester. Data were analyzed using paired Student’s t-test and ANOVA with Tukey post hoc comparisons (p < 0.05).
Results
Significant increases in surface roughness were observed in Group 1 (0.717 ± 0.085 to 2.440 ± 0.225 µm; p < 0.001) and Group 2 (0.791 ± 0.082 to 1.904 ± 0.247 µm; p < 0.001). In contrast, Group 3 showed only a slight and non-significant increase in surface roughness (p = 0.167). Intergroup analysis revealed significant post-treatment differences (p < 0.001), with Tukey’s test distinguishing three subsets: Group 1 > Group 2 > Group 3.
Conclusions
Fluoride-containing toothpaste, particularly when combined with brushing, significantly increased surface roughness of NiTi wires, likely due to fluoride-induced degradation of the protective titanium oxide layer, which increases susceptibility to surface deterioration. Clinically, these findings suggest that fluoride-free formulations may represent a safer alternative for orthodontic patients requiring prolonged use of NiTi wires.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Health Sciences University of the Hemispheres, Quito, Ecuador.
- Department of Orthodontics, Ingá University Center Uningá, Maringá, Paraná, Brazil.
ORCID-Profile: Karen Lisette Vega Bravo, Marjory Elizabeth Vaca Zapata, Mauricio Aguirre Balseca, Karina Maria Salvatore Freitas, Yalil Rodríguez
Zitieren
APA
Vega Bravo, K. L., Vaca Zapata, M. E., Aguirre Balseca, M., Freitas, K. M. S., & Rodríguez, Y. (2026). Effect of fluoride toothpastes on surface roughness of nickel–titanium wires: an in vitro study. Biomaterial Investigations in Dentistry, 13, 425-429. https://doi.org/10.2340/biid.v13.46087
Vancouver
Vega Bravo KL, Vaca Zapata ME, Aguirre Balseca M, Freitas KMS, Rodríguez Y. Effect of fluoride toothpastes on surface roughness of nickel–titanium wires: an in vitro study. Biomaterial Investigations in Dentistry. 2026;13:425-429. doi:10.2340/biid.v13.46087
BibTeX
@article{VegaBravo2026,
author = {Vega Bravo, Karen Lisette and Vaca Zapata, Marjory Elizabeth and Aguirre Balseca, Mauricio and Freitas, Karina Maria Salvatore and Rodríguez, Yalil},
title = {Effect of fluoride toothpastes on surface roughness of nickel–titanium wires: an in vitro study},
journal = {Biomaterial Investigations in Dentistry},
year = {2026},
volume = {13},
pages = {425--429},
doi = {10.2340/biid.v13.46087}
}
EUVIMED