EUVIMEDEUVIMED entdecken
Crossref

Effect of Nanoparticle Type on the Melting Performance of Paraffin-Based Phase Change Materials: A Numerical Study

İrem Karaaslan, Furkan Buğra Öztaşkın, Tayfun Menlik

Journal of Polytechnic · 12.07.2026 · 29 (4)

DOI: 10.2339/politeknik.1972120 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Polytechnic, online erschienen am 12.07.2026. Verfasst von İrem Karaaslan und 2 weiteren Autor:innen. Die Arbeit nennt 19 Literaturangaben. Gefördert von: Gazi University Scientific Research Projects Coordination Unit.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study numerically investigated the melting behavior of pure paraffin (RT58) and nanoparticle-enhanced phase change materials (PCMs) containing 4 vol.% GNP, 4 vol.% NiFe2O4, and a hybrid mixture consisting of 2 vol.% graphene (GNP) and 2 vol.% nickel ferrite (NiFe2O4). GNP, which has been widely recognized for its superior heat transfer characteristics, was selected as a benchmark additive, whereas NiFe2O4 was investigated as a potential alternative nanoparticle for enhancing the thermal performance of latent heat storage systems.Two-dimensional transient simulations were performed using the enthalpy-porosity method implemented in ANSYS Fluent 18.2. The influence of wall temperature and nanoparticle type on melting characteristics was analyzed. Increasing the wall temperature from 360 K to 370 K reduced the melting time of pure paraffin by 65.7%. Based on these results, a wall temperature of 365 K was selected as the reference condition for nanoparticle comparisons. Relative to pure paraffin, the melting time decreased by 38.1%, 48.6%, and 63.8% for GNP-, hybrid-, and NiFe2O4-enhanced PCMs, respectively. Furthermore, the hybrid PCM outperformed the GNP-enhanced PCM by 16.9%, whereas the NiFe2O4-enhanced PCM provided a 41.5% shorter melting duration than the GNP-enhanced PCM.

Förderung

  • Gazi University Scientific Research Projects Coordination Unit

Zitieren

APA

Karaaslan, İ., Öztaşkın, F. B., & Menlik, T. (2026). Effect of Nanoparticle Type on the Melting Performance of Paraffin-Based Phase Change Materials: A Numerical Study. Journal of Polytechnic, 29(4). https://doi.org/10.2339/politeknik.1972120

Vancouver

Karaaslan İ, Öztaşkın FB, Menlik T. Effect of Nanoparticle Type on the Melting Performance of Paraffin-Based Phase Change Materials: A Numerical Study. Journal of Polytechnic. 2026;29(4). doi:10.2339/politeknik.1972120

BibTeX
@article{Karaaslan2026,
  author = {Karaaslan, İrem and Öztaşkın, Furkan Buğra and Menlik, Tayfun},
  title = {Effect of Nanoparticle Type on the Melting Performance of Paraffin-Based Phase Change Materials: A Numerical Study},
  journal = {Journal of Polytechnic},
  year = {2026},
  volume = {29},
  number = {4},
  doi = {10.2339/politeknik.1972120}
}
Kostenlos starten →