Heat Flux Measurements in Stagnation-Point Methane Flames Using LED-Based Thermographic Phosphor Thermometry
Journal of Polytechnic · 12.06.2026 · 29 (4) · 1-8
DOI: 10.2339/politeknik.1856487 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Polytechnic, online erschienen am 12.06.2026. Verfasst von Muhammed Elmnefi. Die Arbeit nennt 29 Literaturangaben.
Abstract (Originalsprache)
This study presents a non-intrusive optical method for heat flux and wall temperature measurements in nearly one-dimensional laminar premixed flames impinging on a flat surface. The approach is based on light-induced phosphorescence from thermographic phosphor thin films applied to both sides of an alumina ceramic plate. Chromium-doped alumina (Cr:Al₂O₃, ruby) was used as the phosphor material, enabling temperature determination on the flame-exposed and cooled sides of the plate. Excitation was provided by a high-power green light-emitting diode (LED) array with a peak wavelength of 525 nm, offering a compact, cost-effective, and safer alternative to conventional laser-based systems. Experiments were conducted using matrix-style and nozzle-type burners to cover a wide range of fuel–air mixture velocities from 0.05 to 1.2 m/s. The ceramic plate was integrated into a water-cooled heat receiver, ensuring controlled boundary conditions and moderate wall temperatures. Phosphorescence signals were detected using photomultiplier tubes and processed through pulse-averaged acquisition to obtain reliable temperature data, from which heat flux values were derived. Experimental results were compared with numerical modeling to evaluate the accuracy of the measurement approach. In addition, the influence of hydrogen enrichment in methane–air flames was examined. Hydrogen addition increased burning velocity and convective heat transfer, leading to higher heat fluxes and altered wall temperature distributions. The results demonstrate the effectiveness of LED-based phosphor thermometry for stagnation-point flame heat transfer studies and hydrogen-enriched combustion systems.
Zitieren
APA
Elmnefi, M. (2026). Heat Flux Measurements in Stagnation-Point Methane Flames Using LED-Based Thermographic Phosphor Thermometry. Journal of Polytechnic, 29(4), 1-8. https://doi.org/10.2339/politeknik.1856487
Vancouver
Elmnefi M. Heat Flux Measurements in Stagnation-Point Methane Flames Using LED-Based Thermographic Phosphor Thermometry. Journal of Polytechnic. 2026;29(4):1-8. doi:10.2339/politeknik.1856487
BibTeX
@article{Elmnefi2026,
author = {Elmnefi, Muhammed},
title = {Heat Flux Measurements in Stagnation-Point Methane Flames Using LED-Based Thermographic Phosphor Thermometry},
journal = {Journal of Polytechnic},
year = {2026},
volume = {29},
number = {4},
pages = {1--8},
doi = {10.2339/politeknik.1856487}
}
EUVIMED