Relationship between the polymerization distance of monowave and polywave light-curing units and the irradiance and physical properties of dental resin-based composites
Journal of Oral Science · 2024 · 66 (3) · 182-188
DOI: 10.2334/josnusd.24-0045 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Oral Science, 2024. Verfasst von Madelin Ruiz-Peñarrieta und 6 weiteren Autor:innen. Beteiligte Einrichtung: Dental Materials and Biomaterials Laboratory, Faculty of Stomatology, Meritorious Autonomous University of Puebla. Hauptthemen laut MEDLINE: Composite Resins, Polymerization, Curing Lights, Dental. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 40 Literaturangaben.
Abstract (Originalsprache)
PURPOSE: To evaluate the influence of the polymerization distance of monowave and polywave light curing units (LCUs) on the measured irradiance relative to the value reported by the manufacturer in relation to the physical properties of resin-based composites (RBCs). METHODS: Four LCUs were used: one monowave and three polywave. The irradiance was measured with a digital radiometer. Depth of cure (DC) and flexural strength (FS) tests were performed according to ISO 4049:2019 at polymerization distances of 0 mm and 5 mm. RESULTS: The irradiance of all LCUs was higher than that reported by the manufacturer (>25-64%). The irradiance of the four LCUs was reduced when polymerization was performed at between 0 to 5 mm (paired t-test, P 0.001). CONCLUSIONS: The LCU must be positioned as near as possible to RBCs during the polymerization process, as increased distance negatively affects the depth of cure and flexural strength.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Dental Materials and Biomaterials Laboratory, Faculty of Stomatology, Meritorious Autonomous University of Puebla.
- Dental Materials and Biomaterials Research Laboratory, Postgraduate Studies, and Research Division, Faculty of Dentistry, National Autonomous University of Mexico.
- Physics Institute, Meritorious Autonomous University of Puebla.
- Department of Integral Dental Clinics, University Center for Health Sciences, University of Guadalajara.
Zitieren
APA
Ruiz-Peñarrieta, M., Moyaho-Bernal, M. L. A., Salazar-Vergara, J. A., Ramírez Ortega, J. P., Serrano de la Rosa, L. E., Rodríguez-Chávez, J. A., & Flores-Ledesma, A. (2024). Relationship between the polymerization distance of monowave and polywave light-curing units and the irradiance and physical properties of dental resin-based composites. Journal of Oral Science, 66(3), 182-188. https://doi.org/10.2334/josnusd.24-0045
Vancouver
Ruiz-Peñarrieta M, Moyaho-Bernal MLA, Salazar-Vergara JA, Ramírez Ortega JP, Serrano de la Rosa LE, Rodríguez-Chávez JA, et al. Relationship between the polymerization distance of monowave and polywave light-curing units and the irradiance and physical properties of dental resin-based composites. Journal of Oral Science. 2024;66(3):182-188. doi:10.2334/josnusd.24-0045
BibTeX
@article{RuizPearrieta2024,
author = {Ruiz-Peñarrieta, Madelin and Moyaho-Bernal, María de Los Angeles and Salazar-Vergara, José A and Ramírez Ortega, Juana P and Serrano de la Rosa, Laura E and Rodríguez-Chávez, Jacqueline A and Flores-Ledesma, Abigailt},
title = {Relationship between the polymerization distance of monowave and polywave light-curing units and the irradiance and physical properties of dental resin-based composites},
journal = {Journal of Oral Science},
year = {2024},
volume = {66},
number = {3},
pages = {182--188},
doi = {10.2334/josnusd.24-0045}
}
EUVIMED