Effect of Layer Thickness, Grain Size, and Surface Roughness on the Color Tone of High-Temperature Oxide Layer on CP Ti
Journal of the Japan Institute of Metals and Materials · 01.04.2026 · 90 (4) · 57-68
DOI: 10.2320/jinstmet.j202527 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of the Japan Institute of Metals and Materials, erschienen am 01.04.2026. Verfasst von Rikuto Ohkita und 1 weiteren Autor:innen. Die Arbeit nennt 72 Literaturangaben.
Abstract (Originalsprache)
Titanium dioxide (TiO2), widely used as a white pigment, exhibits high hiding power due to its high refractive index. In our research group, the optical characteristics of the oxide layer formed on titanium (Ti) and its alloys at high temperature have been investigated, aiming to enhance the esthetic properties of Ti-based dental materials. Although the refractive index is theoretically determined by the material’s dielectric constant and atomic volume, the visual appearance of oxide films can vary even among Ti alloys with identical compositions. These variations are influenced not only by changes in intrinsic refractive index due to alloying or impurities but also by the microstructural features of the oxide layer, such as layer thickness, particle size, and surface roughness, which affect light reflectance in the visible spectrum.In this study, commercially pure titanium (CP Ti) was subjected to high-temperature oxidation at various conditions. The effects of oxide layer thickness, particle size on the surface, and surface roughness on the resulting color tone of the oxide layer were systematically investigated. The oxide layers formed were identified as rutile-type TiO2 by X-ray diffraction (XRD). Color measurements using a spectrophotometer revealed that both layer thickness and particle size strongly influenced the L*a*b* color parameters. Particle size analysis suggested Mie scattering as the dominant light scattering mechanism and the size distribution affects reflectance in particular range of wavelength, consequently, correlates with changes in the b* value. Additionally, increased oxidation temperatures broadened the particle size distribution, and layer growth was associated with a transition in visible color from gray through yellow. These findings indicate that both the oxide layer thickness and particle size play critical roles in determining the color appearance of high-temperature oxidized CP Ti. Such insights can contribute the development of aesthetically improved Ti-based biomaterials.
Zitieren
APA
Ohkita, R., & Miura, E. (2026). Effect of Layer Thickness, Grain Size, and Surface Roughness on the Color Tone of High-Temperature Oxide Layer on CP Ti. Journal of the Japan Institute of Metals and Materials, 90(4), 57-68. https://doi.org/10.2320/jinstmet.j202527
Vancouver
Ohkita R, Miura E. Effect of Layer Thickness, Grain Size, and Surface Roughness on the Color Tone of High-Temperature Oxide Layer on CP Ti. Journal of the Japan Institute of Metals and Materials. 2026;90(4):57-68. doi:10.2320/jinstmet.j202527
BibTeX
@article{Ohkita2026,
author = {Ohkita, Rikuto and Miura, Eri},
title = {Effect of Layer Thickness, Grain Size, and Surface Roughness on the Color Tone of High-Temperature Oxide Layer on CP Ti},
journal = {Journal of the Japan Institute of Metals and Materials},
year = {2026},
volume = {90},
number = {4},
pages = {57--68},
doi = {10.2320/jinstmet.j202527}
}
EUVIMED