EUVIMEDEUVIMED entdecken
Crossref

Biomechanics of molar rotation with the transpalatal arch: applicability of Burstone’s six geometries

Giorgio Fiorelli

The Angle Orthodontist · 30.07.2026

DOI: 10.2319/010926-33.1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Angle Orthodontist, erschienen am 30.07.2026. Verfasst von Giorgio Fiorelli.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objectives

To reevaluate transpalatal arch (TPA) biomechanics for molar rotation by transitioning from the traditional linear beam model to a statically indeterminate elastic portal frame analysis. Materials and Methods A mathematical model based on Castigliano’s second theorem simulated the TPA as a curved portal frame. Different modes of rotational activation were applied to standard and omega-loop designs across variable palatal heights (10 mm to 18 mm) using stainless steel and beta-titanium, incorporating a 2° mechanical clearance to simulate clinical insertion conditions.

Results

Palatal height was the primary determinant of TPA stiffness, acting as a lever arm that converts sagittal forces into torsion. In unilateral activation, average to high palatal vaults (palatal height ≥ 14 mm) generated spontaneous neutrality through the interaction between structural compliance and mechanical clearance, where the moment on the nonactivated side dissipates entirely. Regarding stiffness, contrary to clinical assumptions, the omega loop provided modest additional flexibility (less than 5% for unilateral activation, up to 15% for symmetric activation).

Conclusions

The TPA functions as a flexible elastic frame, not a rigid linear beam. Vertical legs significantly dampen the force system, rendering the omega loop mechanically redundant. Notably, compensatory bends, generally used for unilateral rotation activation, are often biomechanically unnecessary in high-vaulted patients, as the system naturally reduces the contralateral moment to zero within the mechanical tolerance of the attachment.

Schlagwörter

Stichwörter der Autor:innen

BiomechanicsCastigliano's theoremMolar rotationSix geometriesTranspalatal arch

Zitieren

APA

Fiorelli, G. (2026). Biomechanics of molar rotation with the transpalatal arch: applicability of Burstone’s six geometries. The Angle Orthodontist. https://doi.org/10.2319/010926-33.1

Vancouver

Fiorelli G. Biomechanics of molar rotation with the transpalatal arch: applicability of Burstone’s six geometries. The Angle Orthodontist. 2026. doi:10.2319/010926-33.1

BibTeX
@article{Fiorelli2026,
  author = {Fiorelli, Giorgio},
  title = {Biomechanics of molar rotation with the transpalatal arch: applicability of Burstone’s six geometries},
  journal = {The Angle Orthodontist},
  year = {2026},
  doi = {10.2319/010926-33.1}
}
Kostenlos starten →