EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical investigation of cavitation and NPSH characteristics in a centrifugal pump

Matej Stefanic, Andrej Lipej

Thermal Science · 2026 · (00) · 195-195

DOI: 10.2298/tsci260615195s ↗

Kurz gefasst

Fachartikel in der Zeitschrift Thermal Science, 2026. Verfasst von Matej Stefanic und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Accurate prediction of the net positive suction head (NPSH) is essential for assessing cavitation inception in centrifugal pumps, particularly at high rotational speeds. This study presents a numerical investigation of a centrifugal pump operating at 2900 rpm using steady-state and unsteady CFD approaches. The k-ω SST model and its SAS-SST turbulence model were applied with a Rayleigh-Plesset cavitation model. Numerical predictions were validated against experimental measurements conducted according to ISO 9906. The simulations covered an operating range from 0.6 to 1.2 times the flow rate at the best efficiency point (BEP). Steady-state simulations provide a reasonable approximation of hydraulic performance but show clear limitations in predicting cavitation inception, particularly under off-design conditions and with circumferentially averaged rotor-stator interfaces. In comparison, unsteady simulations significantly improve the prediction of NPSH₃ values and cavitation behavior. The SAS-SST model enhances the capture of unsteady flow structures compared to URANS k-ω SST, while NPSH₃ values remain largely unaffected. Reliable NPSH prediction primarily requires unsteady CFD modeling, while scale-adaptive turbulence models provide additional insight into local flow dynamics.

Zitieren

APA

Stefanic, M., & Lipej, A. (2026). Numerical investigation of cavitation and NPSH characteristics in a centrifugal pump. Thermal Science, 195-195. https://doi.org/10.2298/tsci260615195s

Vancouver

Stefanic M, Lipej A. Numerical investigation of cavitation and NPSH characteristics in a centrifugal pump. Thermal Science. 2026:195-195. doi:10.2298/tsci260615195s

BibTeX
@article{Stefanic2026,
  author = {Stefanic, Matej and Lipej, Andrej},
  title = {Numerical investigation of cavitation and NPSH characteristics in a centrifugal pump},
  journal = {Thermal Science},
  year = {2026},
  number = {00},
  pages = {195--195},
  doi = {10.2298/tsci260615195s}
}
Kostenlos starten →