Mitigating thermal runaway in high-nickel batteries role of immersion cooling system
Thermal Science · 2026 · 30 (5 Part B) · 3739-3752
DOI: 10.2298/tsci2605739w ↗Kurz gefasst
Fachartikel in der Zeitschrift Thermal Science, 2026. Verfasst von Haimin Wang und 3 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Insulating oil possesses high specific heat capacity and desirable non-flammability. In this study, thermal runaway was triggered by overheating a Cr20Ni80 resistance wire wrapped around the surface of cylindrical high-nickel batteries, which were completely immersed in insulating oil. Two battery orientations were investigated: horizontal and vertical. Compared with natural convection cooling, immersion cooling in insulating oil exhibited significant advantages. During thermal runaway, the positive electrode temperature, negative electrode temperature, and voltage underwent four distinct stages. Notably, relative to the vertical orientation, the horizontal orientation delayed thermal runaway onset time by 30.46% and prolonged the interval from the first voltage drop to thermal runaway initiation by 20%. Furthermore, the oil temperature difference between the positive and negative electrodes under horizontal orientation was substantially smaller than that under vertical orientation, with a maximum difference of 104.2ºC. Under both immersion cooling configurations, no smoke or flame was observed during Stages I and II, whereas mild gas release occurred in Stage III. However, during Stage IV, a striking difference emerged: the vertical orientation exhibited violent flame ejection at a 68º angle, while no such ejection was observed under the horizontal orientation. In addition, the vertical orientation caused the most severe structural damage, characterized by complete carbonization. Therefore, the horizontal orientation combined with complete immersion in insulating oil is considered the most suitable cooling configuration for high-nickel batteries.
Zitieren
APA
Wang, H., Xu, Y., Lin, C., & Fu, M. (2026). Mitigating thermal runaway in high-nickel batteries role of immersion cooling system. Thermal Science, 30(5 Part B), 3739-3752. https://doi.org/10.2298/tsci2605739w
Vancouver
Wang H, Xu Y, Lin C, Fu M. Mitigating thermal runaway in high-nickel batteries role of immersion cooling system. Thermal Science. 2026;30(5 Part B):3739-3752. doi:10.2298/tsci2605739w
BibTeX
@article{Wang2026,
author = {Wang, Haimin and Xu, Yifeng and Lin, Chunjing and Fu, Meiya},
title = {Mitigating thermal runaway in high-nickel batteries role of immersion cooling system},
journal = {Thermal Science},
year = {2026},
volume = {30},
number = {5 Part B},
pages = {3739--3752},
doi = {10.2298/tsci2605739w}
}
EUVIMED