EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

First-principles study on the mechanical properties of $ \mathrm{Al_2}CuRu $ alloys under strain

Wen-Yu Qian, Yu Chen

Thermal Science · 2026 · 30 (2 Part A) · 1047-1055

DOI: 10.2298/tsci2602047q ↗

Kurz gefasst

Fachartikel in der Zeitschrift Thermal Science, 2026. Verfasst von Wen-Yu Qian und 1 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, the mechanical properties of \mathrm{Al_2}CuRu were calculated by applying uniaxial strain in the y-direction. Research findings indicate that when the strain reaches -14% or 10%, the mechanical stability condition is not met. Consequently, the present study focused exclusively on the mechanical properties of \mathrm{Al_2}CuRu within the strain range of -13% to 9%. The stress-strain curve of \mathrm{Al_2}CuRu under uniaxial strain was analysed, revealing that strain applied in the y-direction resulted in significantly greater stress in the y-direction compared to the x- and z-directions. When the strain was between -4% and 2%, the stress-strain curve exhibited a satisfactory linear pattern. However, when the strain exceeds 2% or -4%, a slight non-linear phenomenon becomes evident. It was observed that \mathrm{Al_2}CuRu exhibited elastic deformation without significant plastic deformation. It was also found that stretching can adjust the elastic modulus of \mathrm{Al_2}CuRu , reduce its Vickers hardness, and increase its ductility. The elastic modulus has a large range of regulation. The adjustable range of bulk modulus and Young?s modulus exceeds 160 GPa. The \mathrm{Al_2}CuRu has a relatively large range of elastic deformation and is a typical plastic material. It is one of the alternative materials for the super elastic alloy family. It is therefore concluded that the mechanical properties of \mathrm{Al_2}CuRu can be regulated by applying uniaxial strain, thus expanding the application range of \mathrm{Al_2}CuRu materials.

Zitieren

APA

Qian, W., & Chen, Y. (2026). First-principles study on the mechanical properties of $ \mathrm{Al_2}CuRu $ alloys under strain. Thermal Science, 30(2 Part A), 1047-1055. https://doi.org/10.2298/tsci2602047q

Vancouver

Qian W, Chen Y. First-principles study on the mechanical properties of $ \mathrm{Al_2}CuRu $ alloys under strain. Thermal Science. 2026;30(2 Part A):1047-1055. doi:10.2298/tsci2602047q

BibTeX
@article{Qian2026,
  author = {Qian, Wen-Yu and Chen, Yu},
  title = {First-principles study on the mechanical properties of $ \mathrmAl_2CuRu $ alloys under strain},
  journal = {Thermal Science},
  year = {2026},
  volume = {30},
  number = {2 Part A},
  pages = {1047--1055},
  doi = {10.2298/tsci2602047q}
}
Kostenlos starten →