Two-dimensional numerical study on combustion characteristics of NH₃/H₂/air combustion in a two-layer porous burner
Thermal Science · 2026 · 30 (5 Part B) · 3595-3607
DOI: 10.2298/tsci251117050d ↗Kurz gefasst
Fachartikel in der Zeitschrift Thermal Science, 2026. Verfasst von Peng Dong und 6 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study primarily investigates the NH₃/H₂/air combustion characteristics with-in a two-layer porous burner employing a 2-D model with a detailed kinetics. The effects of inlet velocity, \mathrm{U_{g,in}} , and blending ratio on the combustion characteristics are systematically examined. It is shown that the gas temperature continuously increases from the inlet before entering the reaction zone due to the heat recirculation via porous medium, thereby expanding the stable combustion limit and lean flammability limit of the mixture. Under a hydrogen blending ratio of 20%, the NH₃/H₂ achieves stable combustion in the burner for \mathrm{U_{g,in}} = 0.2-0.8 m/s and the equivalence ratio range of 0.5-0.65. The stable flames are stabilized just behind the interface when \mathrm{U_{g,in}} < 0.9 m/s, then the flames are stabilized towards the burner outlet. The emission of NO increases monotonically with \mathrm{U_{g,in}} , ranging from approximately 5320 ppm at \mathrm{U_{g,in}} = 0.2 m/s to over 18700 ppm at \mathrm{U_{g,in}} = 0.8 m/s. In contrast, the \mathrm{NO_2} emissions remain relatively stable across the range of inlet velocities studied, fluctuating around 100 ppm. The flame tends to be stabilized towards the upstream as the equivalence ratio increases from 0.55 to 0.65 under \mathrm{U_{g,in}} = 0.8 m/s and blending ratio of 0.2, while the NO is increasing linearly from 14310-19690 ppm with the equivalence ratio. A preliminary experimental validation is conducted and the same variation trend with the experiment is obtained, but the deviation between the two methods is obvious. This study con-tributes to enhancing combustion stability, extending flammability limits, and reducing nitrogen oxide emissions, providing key theoretical support for the development of efficient, low-carbon combustion technologies.
Zitieren
APA
Dong, P., Qu, X., Li, X., Shi, J., Li, J., Chen, D., & He, C. (2026). Two-dimensional numerical study on combustion characteristics of NH₃/H₂/air combustion in a two-layer porous burner. Thermal Science, 30(5 Part B), 3595-3607. https://doi.org/10.2298/tsci251117050d
Vancouver
Dong P, Qu X, Li X, Shi J, Li J, Chen D, et al. Two-dimensional numerical study on combustion characteristics of NH₃/H₂/air combustion in a two-layer porous burner. Thermal Science. 2026;30(5 Part B):3595-3607. doi:10.2298/tsci251117050d
BibTeX
@article{Dong2026,
author = {Dong, Peng and Qu, Xiaohang and Li, Xing and Shi, Junrui and Li, Jun and Chen, Danan and He, Chengdong},
title = {Two-dimensional numerical study on combustion characteristics of NH₃/H₂/air combustion in a two-layer porous burner},
journal = {Thermal Science},
year = {2026},
volume = {30},
number = {5 Part B},
pages = {3595--3607},
doi = {10.2298/tsci251117050d}
}
EUVIMED