EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Influence of hydrolysis on pyrolysis products from sewage sludge

Mujahid Ali, Faisal Mahmood, Mbeugang Magoua, Jiazhen Tang, Bin Li

Thermal Science · 2024 · 28 (5 Part A) · 3817-3824

DOI: 10.2298/tsci231208065a ↗

Kurz gefasst

Fachartikel in der Zeitschrift Thermal Science, 2024. Verfasst von Mujahid Ali und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this research endeavor, the influence of thermal hydrolysis treatment on product distribution obtained through the pyrolysis of hydrolysis treated sludge and raw sewage sludge was investigated. Raw sewage sludge sample was received from a municipal sewage sludge treatment plant, and hydrolysis of sewage sludge was performed at a temperature of 200?C and a pressure of 0.4 MPa in a fixed-bed furnace. The pore structure of the obtained biochar and non-condensable gas collected at various temperatures was analyzed via Brunauer, Emmett, and Teller and gas chromatography techniques, respectively. The results revealed that thermal hydrolysis treatment had a significant impact on product distribution at varying temperatures (500-800?C). An increase in temperature led to a decrease in the biochar and biooil yield, while the yield of gas increased for both hydrolysis treated sludge and raw sewage sludge. It was observed that the concentration of H2, CH4, and CO from hydrolysis treated sludge was higher than raw sewage sludge. Furthermore, it was observed that by increasing the temperature, the pore volume and specific surface area of the biochar increased while the average pore width decreased. The maximum Brunauer, Emmett, and Teller surface area was measured from biochar obtained from hydrolysis treated sludge at 800?C as 50.61 m2/g. The findings suggest that thermal hydrolysis treatment is a viable method for the treatment of sewage sludge as compared to conventional methods.

Zitieren

APA

Ali, M., Mahmood, F., Magoua, M., Tang, J., & Li, B. (2024). Influence of hydrolysis on pyrolysis products from sewage sludge. Thermal Science, 28(5 Part A), 3817-3824. https://doi.org/10.2298/tsci231208065a

Vancouver

Ali M, Mahmood F, Magoua M, Tang J, Li B. Influence of hydrolysis on pyrolysis products from sewage sludge. Thermal Science. 2024;28(5 Part A):3817-3824. doi:10.2298/tsci231208065a

BibTeX
@article{Ali2024,
  author = {Ali, Mujahid and Mahmood, Faisal and Magoua, Mbeugang and Tang, Jiazhen and Li, Bin},
  title = {Influence of hydrolysis on pyrolysis products from sewage sludge},
  journal = {Thermal Science},
  year = {2024},
  volume = {28},
  number = {5 Part A},
  pages = {3817--3824},
  doi = {10.2298/tsci231208065a}
}
Kostenlos starten →