Analysis of flow and heat transfer performance of different types of flow channels in printed circuit heat exchangers for pre-coolers
Thermal Science · 2024 · 28 (4 Part A) · 2977-2988
DOI: 10.2298/tsci230902072g ↗Kurz gefasst
Fachartikel in der Zeitschrift Thermal Science, 2024. Verfasst von Xin Gu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
The shape of fins in flow channels of printed circuit heat exchangers (PCHE) significantly affects the heat exchanger performance. In the pre-cooler condition of the marine supercritical CO2 Brayton cycle power generation system, this study focuses on three typical discontinuous flow channel printed circuit heat exchangers. The investigation involves a numerical analysis of flow and heat transfer performance using CFD method. The comparative consequences illuminate that the rectangular fin channel exhibits the optimal heat transfer performance, and temperature drops are 1.18 times and 1.23 times, exceeding those of airfoil and rhombic fin channels, respectively. All three flow channels show different degrees of temperature drop reduction along the direction of fluid-flow. However, the rectangular fin channel demonstrates the worst flow performance, as pressure drops are 16.6 times and 17.8 times, higher than those of airfoil and rhombic fin channels, respectively. By calculating the values of Nu/f and Q/?p, the comprehensive performance of each flow channel is ranked from high to low airfoil fin channel, rhombic fin channel, and rectangular fin channel. This research provides guidance for optimizing the design and applying PCHE in engineering for marine supercritical CO2 Brayton cycle pre-coolers.
Zitieren
APA
Gu, X., Liu, X., Sun, H., Zhu, Y., & Wang, Y. (2024). Analysis of flow and heat transfer performance of different types of flow channels in printed circuit heat exchangers for pre-coolers. Thermal Science, 28(4 Part A), 2977-2988. https://doi.org/10.2298/tsci230902072g
Vancouver
Gu X, Liu X, Sun H, Zhu Y, Wang Y. Analysis of flow and heat transfer performance of different types of flow channels in printed circuit heat exchangers for pre-coolers. Thermal Science. 2024;28(4 Part A):2977-2988. doi:10.2298/tsci230902072g
BibTeX
@article{Gu2024,
author = {Gu, Xin and Liu, Xin and Sun, Hao and Zhu, Yiwen and Wang, Yongqing},
title = {Analysis of flow and heat transfer performance of different types of flow channels in printed circuit heat exchangers for pre-coolers},
journal = {Thermal Science},
year = {2024},
volume = {28},
number = {4 Part A},
pages = {2977--2988},
doi = {10.2298/tsci230902072g}
}
EUVIMED