EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Numerical analysis for the impacts of using nano-enhanced PCM on the thermal management of battery module

Fatih Selimefendigil, Fethi Cakmak, Hakan Oztop

Thermal Science · 2024 · 28 (2 Part C) · 1893-1904

DOI: 10.2298/tsci230706230s ↗

Kurz gefasst

Fachartikel in der Zeitschrift Thermal Science, 2024. Verfasst von Fatih Selimefendigil und 2 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The temperature and temperature differences in the battery module rise as a result of the high heat output produced by lithium-ion batteries during operation. This can reduce the operating safety of the battery and reduce the battery life. As a result, the temperature of the batteries must be controlled well by thermal management. Thermal control of batteries employs both active and passive techniques. In this study, PCM, which is a passive cooling system, was used. It has been observed that by placing PCM around the battery, it effectively reduces the peak temperature during the end of discharge in the battery cell. The RT-27 and nano-doped RT-27 with suitable melting range were used as PCM. Four different situations were investigated at 0.3C and 0.5C discharge conditions. These are battery models coated with only the battery, RT-27, coated with nano-RT-27, and coated with RT- 27 and nano-RT-27, respectively. The peak temperature was found to be higher when the battery module without PCM was compared to the others. The battery module coated on both surfaces with RT-27 and nano-RT-27 performed better than the other modules. At 0.3 C-Rate, the peak temperature reduces by 1.8 K while it is 4.4 K at 0.5C-Rate.

Zitieren

APA

Selimefendigil, F., Cakmak, F., & Oztop, H. (2024). Numerical analysis for the impacts of using nano-enhanced PCM on the thermal management of battery module. Thermal Science, 28(2 Part C), 1893-1904. https://doi.org/10.2298/tsci230706230s

Vancouver

Selimefendigil F, Cakmak F, Oztop H. Numerical analysis for the impacts of using nano-enhanced PCM on the thermal management of battery module. Thermal Science. 2024;28(2 Part C):1893-1904. doi:10.2298/tsci230706230s

BibTeX
@article{Selimefendigil2024,
  author = {Selimefendigil, Fatih and Cakmak, Fethi and Oztop, Hakan},
  title = {Numerical analysis for the impacts of using nano-enhanced PCM on the thermal management of battery module},
  journal = {Thermal Science},
  year = {2024},
  volume = {28},
  number = {2 Part C},
  pages = {1893--1904},
  doi = {10.2298/tsci230706230s}
}
Kostenlos starten →