Effect of induration and gangue content on the strength and pore morphology of iron ore pellets for hydrogen-based direct reduction
Science of Sintering · 2026 · (00) · 7-7
DOI: 10.2298/sos260613007w ↗Kurz gefasst
Fachartikel in der Zeitschrift Science of Sintering, 2026. Verfasst von Shiwei Wang und 6 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Iron ore pellets for hydrogen-based direct reduction must combine sufficient strength with a pore morphology that allows efficient gas access, and both are set during induration. This work examined how induration temperature (1150-1300°C) and holding time (10-40 min) control the compressive strength and pore morphology of pellets made from a low-gangue iron ore concentrate, with a high-gangue concentrate used for comparison. Both mixtures contained 10 wt.% mill scale, incorporated as an iron-rich steelmaking by-product. Strength was mapped over the full temperature-time matrix, the microstructure was followed by optical and scanning electron microscopy, and the pore morphology was quantified by image analysis; selected pellets were then reduced in a hydrogen-rich gas at 950°C. Compressive strength increased from about 5 to 43 MPa, with temperature the more effective variable. Stronger induration lowered the total porosity only slightly and mainly closed the finest pores, while the gas-accessible network was preserved. All pellets reached a high final reduction degree; a higher gangue content and stronger induration each slowed reduction by limiting gas-accessible porosity. These results identify induration conditions that provide a practical balance between strength, reducibility, and mill-scale recycling.
Zitieren
APA
Wang, S., Liu, H., Andjic, D., Jovanovic, G., Gao, B., Gao, Y., & Manojlovic, V. (2026). Effect of induration and gangue content on the strength and pore morphology of iron ore pellets for hydrogen-based direct reduction. Science of Sintering, 7-7. https://doi.org/10.2298/sos260613007w
Vancouver
Wang S, Liu H, Andjic D, Jovanovic G, Gao B, Gao Y, et al. Effect of induration and gangue content on the strength and pore morphology of iron ore pellets for hydrogen-based direct reduction. Science of Sintering. 2026:7-7. doi:10.2298/sos260613007w
BibTeX
@article{Wang2026,
author = {Wang, Shiwei and Liu, Hongqiang and Andjic, Dimitrije and Jovanovic, Gvozden and Gao, Bing and Gao, Yanan and Manojlovic, Vaso},
title = {Effect of induration and gangue content on the strength and pore morphology of iron ore pellets for hydrogen-based direct reduction},
journal = {Science of Sintering},
year = {2026},
number = {00},
pages = {7--7},
doi = {10.2298/sos260613007w}
}
EUVIMED