(TiZrNbTa)Cx high-entropy carbide with enhanced toughness via in-situ carbon nanoflakes
Science of Sintering · 2026 · (00) · 4-4
DOI: 10.2298/sos260507004l ↗Kurz gefasst
Fachartikel in der Zeitschrift Science of Sintering, 2026. Verfasst von Binyao Liu und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
High-entropy carbides (HECs), specifically (TiZrNbTa)Cx with an average grain size of 0.5 μm and uniformly distributed in-situ carbon nanoflakes, were prepared via wet milling at room temperature followed by hot pressing at 1900°C. The microstructure and mechanical properties of these high-entropy ceramics were systematically investigated. The formation of in-situ carbon nanoflakes is attributed to the introduction of oxygen during wet milling. During sintering, oxygen substitutes for carbon in the high-entropy carbides, leading to carbon enrichment and ultimately resulting in the formation of in-situ carbon nanoflakes. This interpretation is supported by the observation that the carbon nanoflake content increased after aging the ceramic at 1200°C in a vacuum furnace for 10 hours, as further substitution of oxygen for carbon occurred. The fracture toughness of sintered (TiZrNbTa)Cx was measured to be above 6.22 MPa• m^{1/2} by the indentation method, showing excellent toughness performance, owing to its fine grain size and in-situ formed carbon nanoflakes.
Zitieren
APA
Liu, B., Huang, S., & Xu, S. (2026). (TiZrNbTa)Cx high-entropy carbide with enhanced toughness via in-situ carbon nanoflakes. Science of Sintering, 4-4. https://doi.org/10.2298/sos260507004l
Vancouver
Liu B, Huang S, Xu S. (TiZrNbTa)Cx high-entropy carbide with enhanced toughness via in-situ carbon nanoflakes. Science of Sintering. 2026:4-4. doi:10.2298/sos260507004l
BibTeX
@article{Liu2026,
author = {Liu, Binyao and Huang, Shuangyan and Xu, Shuai},
title = {(TiZrNbTa)Cx high-entropy carbide with enhanced toughness via in-situ carbon nanoflakes},
journal = {Science of Sintering},
year = {2026},
number = {00},
pages = {4--4},
doi = {10.2298/sos260507004l}
}
EUVIMED