EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Artificial neural network applied on sintered BaTiO3-ceramic density

Branislav Randjelovic, Srdjan Ribar, Vojislav Mitic, Bojana Markovic, Hans Fecht, Branislav Vlahovic

Science of Sintering · 2022 · 54 (4) · 425-438

DOI: 10.2298/sos2204425r ↗

Kurz gefasst

Fachartikel in der Zeitschrift Science of Sintering, 2022. Verfasst von Branislav Randjelovic und 5 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

It is very important to determine microstructure parameters of consolidated ceramic samples, because it opens new frontiers for further microelectronics miniaturization and integrations. Therefore, controlling, predicting and designing the ceramic materials? properties are the objectives in ceramic materials consolidating process, within the science of sintering. In order to calculate the precise values of desired microstructure parameter at the level of the grains? coating layers based on the measurements on the bulk samples, we applied the artificial neural networks, as a powerful mathematical tool for mapping input-output data. Input signals are propagated forward, as well as the adjustable coefficients that contribute the calculated output signal, denoted as error, which is propagated backwards and replaced by examined parameter. In our previous research, we used neural networks to calculate different electrophysical parameters at the nano level of the grain boundary, like relative capacitance, breakdown voltage or tangent loss, and now we extend the research on sintered material?s density calculation. Errors on the network output were substituted by different consolidated samples density values measured on the bulk, thus enabling the calculation of precise material?s density values between the layers. We performed the neural network theoretical experiments for different number of neurons in hidden layers, according to experimental ceramics material?s density of ?=5.4x103[kg/m3], but it opens the possibility for neural networks application within other density values, as well.

Zitieren

APA

Randjelovic, B., Ribar, S., Mitic, V., Markovic, B., Fecht, H., & Vlahovic, B. (2022). Artificial neural network applied on sintered BaTiO3-ceramic density. Science of Sintering, 54(4), 425-438. https://doi.org/10.2298/sos2204425r

Vancouver

Randjelovic B, Ribar S, Mitic V, Markovic B, Fecht H, Vlahovic B. Artificial neural network applied on sintered BaTiO3-ceramic density. Science of Sintering. 2022;54(4):425-438. doi:10.2298/sos2204425r

BibTeX
@article{Randjelovic2022,
  author = {Randjelovic, Branislav and Ribar, Srdjan and Mitic, Vojislav and Markovic, Bojana and Fecht, Hans and Vlahovic, Branislav},
  title = {Artificial neural network applied on sintered BaTiO3-ceramic density},
  journal = {Science of Sintering},
  year = {2022},
  volume = {54},
  number = {4},
  pages = {425--438},
  doi = {10.2298/sos2204425r}
}
Kostenlos starten →