EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermodynamic assessment of industrial pyrometallurgical extraction routes for refractory metals

Dragan Manasijevic

Journal of the Serbian Chemical Society · 2026 · (00) · 68-68

DOI: 10.2298/jsc260821068m ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the Serbian Chemical Society, 2026. Verfasst von Dragan Manasijevic. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Industrial production of refractory metals is governed primarily by thermodynamic constraints arising from the strong affinity of these metals toward carbon and oxygen. In the present work, a unified thermodynamic assessment of representative refractory metals (V, Nb, Ta, Mo, W, and Re) was performed to establish the thermodynamic basis for selecting pyrometallurgical extraction routes. Standard Gibbs free energy calculations, Ellingham diagrams, and HSC Chemistry equilibrium calculations were employed to compare oxide stability, carbide formation tendency, hydrogen reduction, metallothermic reduction, and chlorination-based extraction routes. The calculations show that \mathrm{Nb_2O_5} and \mathrm{Ta_2O_5} possess the highest thermodynamic stability and simultaneously exhibit the strongest tendency toward carbide formation, explaining why chlorination followed by metallothermic reduction is preferred industrially. In contrast, \mathrm{MoO_3} and \mathrm{WO_3} are sufficiently reducible by hydrogen, while equilibrium calculations demonstrate the important influence of hydrogen excess on the final metallization degree. Metallothermic reduction of \mathrm{V_2O_5} with Al, Mg, and Ca is thermodynamically feasible over the investigated temperature range, whereas industrial preference for aluminothermy is mainly determined by technological and economic factors. Thermodynamic analysis of chlorination and carbochlorination further demonstrates that direct chlorination of \mathrm{Nb_2O_5} and \mathrm{Ta_2O_5} is unfavorable, while carbochlorination provides a strong driving force for pentachloride formation. The results provide a consistent thermodynamic explanation for the selection of industrial extraction routes for refractory metals.

Zitieren

APA

Manasijevic, D. (2026). Thermodynamic assessment of industrial pyrometallurgical extraction routes for refractory metals. Journal of the Serbian Chemical Society, 68-68. https://doi.org/10.2298/jsc260821068m

Vancouver

Manasijevic D. Thermodynamic assessment of industrial pyrometallurgical extraction routes for refractory metals. Journal of the Serbian Chemical Society. 2026:68-68. doi:10.2298/jsc260821068m

BibTeX
@article{Manasijevic2026,
  author = {Manasijevic, Dragan},
  title = {Thermodynamic assessment of industrial pyrometallurgical extraction routes for refractory metals},
  journal = {Journal of the Serbian Chemical Society},
  year = {2026},
  number = {00},
  pages = {68--68},
  doi = {10.2298/jsc260821068m}
}
Kostenlos starten →