EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Influence of crack morphology on creep-stage modelling of 316L(N) austenitic stainless steels

Oguz Ozdemir

Journal of Mining and Metallurgy, Section B: Metallurgy · 2026 · 62 (2) · 257-266

DOI: 10.2298/jmmb260507019o ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Mining and Metallurgy, Section B: Metallurgy, 2026. Verfasst von Oguz Ozdemir. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The creep behavior of a reference 316L(N) grade and a modified 316L(N) grade with adjusted minor alloying elements, mainly N, Nb, and B (Steel A), was investigated at 575°C and 310 MPa. The strain–time response was analyzed across primary, steady-state, and tertiary creep stages. Steel A exhibited a rupture life of 9203 h, compared with 649 h for the reference steel. Optical microscopy, SEM, and X-ray tomography revealed narrow wedge-type cracks in the reference steel, whereas Steel A developed thicker, more rounded R-type cracks. The Estrin–Mecking approach described the primary and steady-state stages, while Ganesan’s damage-tolerance factor and Yin’s cavity-growth model were used for the tertiary stage. The damage-tolerance parameter λ increased from 3.6 to 4.6. In the Estrin–Mecking analysis, the fitted internalstress parameters increased from 215 to 239 MPa for the reference steel and from 230 to 253 MPa for Steel A. These results indicate that crack morphology should be considered when interpreting tertiary creep model parameters, particularly when models are based on different damage assumptions.

Zitieren

APA

Ozdemir, O. (2026). Influence of crack morphology on creep-stage modelling of 316L(N) austenitic stainless steels. Journal of Mining and Metallurgy, Section B: Metallurgy, 62(2), 257-266. https://doi.org/10.2298/jmmb260507019o

Vancouver

Ozdemir O. Influence of crack morphology on creep-stage modelling of 316L(N) austenitic stainless steels. Journal of Mining and Metallurgy, Section B: Metallurgy. 2026;62(2):257-266. doi:10.2298/jmmb260507019o

BibTeX
@article{Ozdemir2026,
  author = {Ozdemir, Oguz},
  title = {Influence of crack morphology on creep-stage modelling of 316L(N) austenitic stainless steels},
  journal = {Journal of Mining and Metallurgy, Section B: Metallurgy},
  year = {2026},
  volume = {62},
  number = {2},
  pages = {257--266},
  doi = {10.2298/jmmb260507019o}
}
Kostenlos starten →