EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Spatial variability of HV5 hardness in industrial direct chill cast EN AW-5083 ingots in the as-cast and homogenized conditions

Natalija Dolic, Zdenka Zovko-Brodarac, Franjo Kozina

Journal of Mining and Metallurgy, Section B: Metallurgy · 2026 · 62 (2) · 149-161

DOI: 10.2298/jmmb260327012d ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Mining and Metallurgy, Section B: Metallurgy, 2026. Verfasst von Natalija Dolic und 2 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examines the spatial variability of HV5 hardness in industrially produced Direct Chill (DC) cast EN AW-5083 aluminium alloy ingots in the as-cast and homogenized conditions. Hardness measurements were performed at predefined sampling positions in the front and rear sections of six ingots using a Latin square design and evaluated by analysis of variance (ANOVA), coefficients of variation, correlation analysis, and linear regression. The results indicate a uniform longitudinal hardness distribution, with similar mean HV5 values at the front and rear sections, while significantly larger variations occur across the ingot cross-section. Slice height (i) and slice width (j) were identified as the dominant sources of variability. Homogenization reduced the overall mean HV5 from 81.8 HV5 to 75.7 HV5, decreased the coefficient of variation from 5.56% to 4.64%, and increased the correlation coefficient from r = 0.76 to r = 0.85. A statistically significant but limited relationship between the number of grains per unit area (NA) and hardness was observed, indicating that NA contributes to local hardness variations but is not the dominant factor controlling the overall spatial hardness distribution. The results indicate that homogenization does not increase hardness but improves its spatial homogeneity primarily through reduction of local microstructural and compositional heterogeneity.

Zitieren

APA

Dolic, N., Zovko-Brodarac, Z., & Kozina, F. (2026). Spatial variability of HV5 hardness in industrial direct chill cast EN AW-5083 ingots in the as-cast and homogenized conditions. Journal of Mining and Metallurgy, Section B: Metallurgy, 62(2), 149-161. https://doi.org/10.2298/jmmb260327012d

Vancouver

Dolic N, Zovko-Brodarac Z, Kozina F. Spatial variability of HV5 hardness in industrial direct chill cast EN AW-5083 ingots in the as-cast and homogenized conditions. Journal of Mining and Metallurgy, Section B: Metallurgy. 2026;62(2):149-161. doi:10.2298/jmmb260327012d

BibTeX
@article{Dolic2026,
  author = {Dolic, Natalija and Zovko-Brodarac, Zdenka and Kozina, Franjo},
  title = {Spatial variability of HV5 hardness in industrial direct chill cast EN AW-5083 ingots in the as-cast and homogenized conditions},
  journal = {Journal of Mining and Metallurgy, Section B: Metallurgy},
  year = {2026},
  volume = {62},
  number = {2},
  pages = {149--161},
  doi = {10.2298/jmmb260327012d}
}
Kostenlos starten →