EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Influence of heat treatment on the microstructure, phase transformation, and thermal cycling stability of NiTiZr alloys

Qiang Yu, Rizawan Guli, Pengfei Qi, Ruixin Gong, Qian Zhang, Wentao Qu

Journal of Mining and Metallurgy, Section B: Metallurgy · 2026 · 62 (2) · 243-255

DOI: 10.2298/jmmb260306018y ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Mining and Metallurgy, Section B: Metallurgy, 2026. Verfasst von Qiang Yu und 5 weiteren Autor:innen. Die Arbeit nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work examines how post-annealing temperature affects the thermal-energy storage behavior of the Ni49.5Ti38.5Zr12 phase-change alloy, with the aim of mitigating heat loss and electronic failures that often occur in insulation bottles due to structural imperfections or inadequate heat-storage capability. Specimens were heat-treated over a range of temperatures, and their transformation characteristics, microstructural evolution, and thermophysical performance were systematically evaluated. The results indicate that with increasing heat-treatment temperature, the transformation enthalpy rises initially and then declines. This trend is associated with the progressive morphological change of the precipitated λ1 phase-from fine bubble-like features to sheet-like structures-together with a grain size variation that also increases first and subsequently decreases. In addition, thermal conductivity shows an overall upward tendency, which can be explained by enhanced atomic motion in the crystal lattice at elevated temperatures. After annealing at 600°C, the alloy exhibits a transformation enthalpy of 29.8 J·g−1, a transformation start temperature (As) of 72.97°C, a finish temperature (Af) of 119.81°C, a thermal conductivity of 15.3 W·g−1·K−1, and a microhardness of 355.147 HV. Moreover, the material retains good thermal stability after repeated thermal cycling. These outcomes provide theoretical support for employing NiTiZrbased materials in downhole insulation bottles. An annealing window of 500-700°C is recommended to improve transformation stability and thermophysical properties, enabling suitability for high-temperature service environments such as downhole tools in the petroleum industry.

Zitieren

APA

Yu, Q., Guli, R., Qi, P., Gong, R., Zhang, Q., & Qu, W. (2026). Influence of heat treatment on the microstructure, phase transformation, and thermal cycling stability of NiTiZr alloys. Journal of Mining and Metallurgy, Section B: Metallurgy, 62(2), 243-255. https://doi.org/10.2298/jmmb260306018y

Vancouver

Yu Q, Guli R, Qi P, Gong R, Zhang Q, Qu W. Influence of heat treatment on the microstructure, phase transformation, and thermal cycling stability of NiTiZr alloys. Journal of Mining and Metallurgy, Section B: Metallurgy. 2026;62(2):243-255. doi:10.2298/jmmb260306018y

BibTeX
@article{Yu2026,
  author = {Yu, Qiang and Guli, Rizawan and Qi, Pengfei and Gong, Ruixin and Zhang, Qian and Qu, Wentao},
  title = {Influence of heat treatment on the microstructure, phase transformation, and thermal cycling stability of NiTiZr alloys},
  journal = {Journal of Mining and Metallurgy, Section B: Metallurgy},
  year = {2026},
  volume = {62},
  number = {2},
  pages = {243--255},
  doi = {10.2298/jmmb260306018y}
}
Kostenlos starten →