Design of High-Power Reverse-Conducting Gate-Commutated Thyristors
Facta universitatis - series: Electronics and Energetics · 2002
DOI: 10.2298/fuee0201041e ↗Kurz gefasst
Fachartikel in der Zeitschrift Facta universitatis - series: Electronics and Energetics, 2002. Verfasst von Dong Eun und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Different structures of Reserve-Conducting Gate-Commutated\break Thyristor (RC-GCT) are considered in this paper. The non-punch-through and punch-through structures were recommended for blocking voltages of 2.5 kV and 4.5 kV, respectively. The photomasks were designed upon the high turn-off capability of GCT and the monolithic integration of GCT and free wheeling diode (FWD). For a large-diameter RC-GCT device with a high turn-off current capacity, FWD and GCT were designed at the center region and the outer part of wafer, respectively. Mixed mode simulation results using the ISE-TCAD simulators give turn-on and turn-off waveforms of the considered structures. A modified isolation structure between GCT and FWD is proposed for RC-GCT.
Zitieren
APA
Eun, D., Chang, L., Sang, C., Nam, K., Jian, Q., & Ji, B. (2002). Design of High-Power Reverse-Conducting Gate-Commutated Thyristors. Facta universitatis - series: Electronics and Energetics. https://doi.org/10.2298/fuee0201041e
Vancouver
Eun D, Chang L, Sang C, Nam K, Jian Q, Ji B. Design of High-Power Reverse-Conducting Gate-Commutated Thyristors. Facta universitatis - series: Electronics and Energetics. 2002. doi:10.2298/fuee0201041e
BibTeX
@article{Eun2002,
author = {Eun, Dong and Chang, Li and Sang, Cheol and Nam, Kyun and Jian, Qui and Ji, Bin},
title = {Design of High-Power Reverse-Conducting Gate-Commutated Thyristors},
journal = {Facta universitatis - series: Electronics and Energetics},
year = {2002},
doi = {10.2298/fuee0201041e}
}
EUVIMED