EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Mathematical modelling of thin layer drying of pear

Monika Lutovska, Vangelce Mitrevski, Ivan Pavkov, Vladimir Mijakovski, Milivoj Radojcin

Chemical Industry and Chemical Engineering Quarterly · 2016 · 22 (2) · 191-199

DOI: 10.2298/ciceq150122032l ↗

Kurz gefasst

Fachartikel in der Zeitschrift Chemical Industry and Chemical Engineering Quarterly, 2016. Verfasst von Monika Lutovska und 4 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, a thin - layer drying of pear slices as a function of drying conditions were examined. The experimental data set of thin - layer drying kinetics at five drying air temperatures 30, 40, 50, 60 and 70?C, and three drying air velocities 1, 1.5 and 2 m s-1 were obtained on the experimental setup, designed to imitate industrial convective dryer. Five well known thin - layer drying models from scientific literature were used to approximate the experimental data in terms of moisture ratio. In order to find which model gives the best results, numerical experiments were made. For each model and data set, the statistical performance index, (?), and chi-squared, (?2), value were calculated and models were ranked afterwards. The performed statistical analysis shows that the model of Midilli gives the best statistical results. Because the effect of drying air temperature and drying air velocity on the empirical parameters was not included in the base Midilli model, in this study the generalized form of this model was developed. With this model, the drying kinetic data of pear slices can be approximated with high accuracy. The effective moisture diffusivity was determined by using Fick?s second laws. The obtained values of the effective moisture diffusivity, (Deff), during drying ranged between 6.49 x 10-9 and 3.29 x 10-8 m2 s-1, while the values of activation energy (E0) varied between 28.15 to 30.51 kJ mol-1.

Zitieren

APA

Lutovska, M., Mitrevski, V., Pavkov, I., Mijakovski, V., & Radojcin, M. (2016). Mathematical modelling of thin layer drying of pear. Chemical Industry and Chemical Engineering Quarterly, 22(2), 191-199. https://doi.org/10.2298/ciceq150122032l

Vancouver

Lutovska M, Mitrevski V, Pavkov I, Mijakovski V, Radojcin M. Mathematical modelling of thin layer drying of pear. Chemical Industry and Chemical Engineering Quarterly. 2016;22(2):191-199. doi:10.2298/ciceq150122032l

BibTeX
@article{Lutovska2016,
  author = {Lutovska, Monika and Mitrevski, Vangelce and Pavkov, Ivan and Mijakovski, Vladimir and Radojcin, Milivoj},
  title = {Mathematical modelling of thin layer drying of pear},
  journal = {Chemical Industry and Chemical Engineering Quarterly},
  year = {2016},
  volume = {22},
  number = {2},
  pages = {191--199},
  doi = {10.2298/ciceq150122032l}
}
Kostenlos starten →