A Finite Element Simulation for the Analysis of Ball Bearing Contact and Fatigue Using Goodman Theory
Mehran University Research Journal of Engineering and Technology · 01.07.2026 · 45 (3) · 124-131
DOI: 10.22581/muet1982.0678 ↗Kurz gefasst
Fachartikel in der Zeitschrift Mehran University Research Journal of Engineering and Technology, online erschienen am 01.07.2026. Verfasst von Saima Bhatti und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Ensuring the mechanical integrity and service life of rolling-element bearings requires a clear understanding of contact stresses under operational loading. This study presents a finite element analysis of a deep-groove ball bearing in ANSYS, where the load is transferred from the shaft through the rolling elements to the outer race. The Goodman and Soderberg mean-stress criteria were integrated with the contact model to compare fatigue predictions. A mesh-independence study used 10,000, 25,000, and 70,000 elements. At a radial pressure of 100 MPa, the maximum von Mises stress was approximately 496 MPa, and local factor-of-safety values were below 1.0, indicating a risk of local yielding and premature fatigue failure. Reducing the pressure to 10 MPa increased the minimum Goodman factor of safety to 1.73 and extended the predicted fatigue life to 1 × 10⁶ cycles. The Soderberg criterion consistently produced lower safety factors and shorter life estimates than the Goodman criterion under the same loading conditions. The integrated framework generates spatially resolved stress, safety-factor, and fatigue-life maps that can support bearing-design optimisation and predictive maintenance of rotating machinery.
Zitieren
APA
Bhatti, S., Mansoor, A., Khan, O., & Shaikh, A. A. (2026). A Finite Element Simulation for the Analysis of Ball Bearing Contact and Fatigue Using Goodman Theory. Mehran University Research Journal of Engineering and Technology, 45(3), 124-131. https://doi.org/10.22581/muet1982.0678
Vancouver
Bhatti S, Mansoor A, Khan O, Shaikh AA. A Finite Element Simulation for the Analysis of Ball Bearing Contact and Fatigue Using Goodman Theory. Mehran University Research Journal of Engineering and Technology. 2026;45(3):124-131. doi:10.22581/muet1982.0678
BibTeX
@article{Bhatti2026,
author = {Bhatti, Saima and Mansoor, Asif and Khan, Obaidullah and Shaikh, Asif Ali},
title = {A Finite Element Simulation for the Analysis of Ball Bearing Contact and Fatigue Using Goodman Theory},
journal = {Mehran University Research Journal of Engineering and Technology},
year = {2026},
volume = {45},
number = {3},
pages = {124--131},
doi = {10.22581/muet1982.0678}
}
EUVIMED