High Strength Ambient Cured Red Mud Geopolymer using Automotive GlassWaste and GGBFS: Mechanical and Microstructure Properties
Mehran University Research Journal of Engineering and Technology · 2026
DOI: 10.22581/0135 ↗Kurz gefasst
Fachartikel in der Zeitschrift Mehran University Research Journal of Engineering and Technology, 2026. Verfasst von JOONAITH CHUNDAN VEEDU und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
The Bayer process for refining bauxite ore produces a highly alkaline by-product called red mud (RM). The typical disposal of this product on open land creates a high impact on the environment. To mitigate these ecological issues, utilizing RM in geopolymer concrete (GPC) offers a sustainable solution. This study aims to enhance the mechanical properties of RM-based GPC cured under ambient conditions to produce higher-grade concrete. Red mud was collected from the eastern region of the Kingdom of Saudi Arabia, and microstructural investigations were conducted to characterize the binder components. Although RM contains silica and alumina, the quantities are insufficient to produce high-strength concrete. Therefore, the geopolymerization process was enhanced by incorporating alumina, silica, and calcium-rich materials such as ground granulated blast furnace slag (GGBFS) and silica-rich automotive glass waste powder (AGWP). A series of tests aimed at optimizing the molarity (M) of sodium hydroxide (SH) solution, the sodium silicate (SS) to SH ratio, the fluid-to-binder (F/B) ratio, and the binder proportions were also conducted. Experimental results indicate that under ambient temperature (27 - 31 ̊C), the F/B ratio of 0.5, M=10, and SS/SH = 2.5 with binder proportions of RM: AGWP: GGBFS = 50:10:40 produces a remarkable compressive strength of 64 MPa at 28 days of the curing period. Microstructural observations revealed denser gel formation and reduced porosity in ternary blends. The results demonstrate a viable pathway to high-strength, ambient-cured RM geopolymers.
Zitieren
APA
VEEDU, J. C., Khalid, N. H. A., Shukor, N. H. A., Ishak, S., & Talip, A. R. A. (2026). High Strength Ambient Cured Red Mud Geopolymer using Automotive GlassWaste and GGBFS: Mechanical and Microstructure Properties. Mehran University Research Journal of Engineering and Technology. https://doi.org/10.22581/0135
Vancouver
VEEDU JC, Khalid NHA, Shukor NHA, Ishak S, Talip ARA. High Strength Ambient Cured Red Mud Geopolymer using Automotive GlassWaste and GGBFS: Mechanical and Microstructure Properties. Mehran University Research Journal of Engineering and Technology. 2026. doi:10.22581/0135
BibTeX
@article{VEEDU2026,
author = {VEEDU, JOONAITH CHUNDAN and Khalid, Nur Hafizah Abdul and Shukor, Nor Hasanah Abdul and Ishak, Shafiq and Talip, Adrina Rosseira A.},
title = {High Strength Ambient Cured Red Mud Geopolymer using Automotive GlassWaste and GGBFS: Mechanical and Microstructure Properties},
journal = {Mehran University Research Journal of Engineering and Technology},
year = {2026},
doi = {10.22581/0135}
}
EUVIMED