Surface Wettability of ZnO Thin Films
Malaysian NANO-An International Journal · 2022
DOI: 10.22452/mnij.vol2no1.3 ↗Kurz gefasst
Fachartikel in der Zeitschrift Malaysian NANO-An International Journal, 2022. Verfasst von Mohd Rashid Yusof Hamid und 2 weiteren Autor:innen.
Abstract (Originalsprache)
In this study, zinc oxide (ZnO) structured films were grown on glass substrates using a simple chemical bath deposition (CBD) method with different salt precursors. The variation of salt precursors towards the surface morphology of thin films and its wettability properties were investigated. Four types of zinc (Zn) salt used as precursors are zinc chloride (ZnCl2), zinc acetate (ZnAc2), zinc nitrate (Zn(NO3)2) and zinc sulfate (ZnSO4). The crystallinity of ZnO thin films was evaluated using X-ray diffraction (XRD), and the surface morphology was observed using field emission scanning microscopy (FESEM). Finally, the wettability was determined by contact angle (CA) measurement. It was found that ZnCl2 has the lowest CA (127.1°), while ZnSO4 exhibits the highest CA (142.3°). The Zn salts used significantly influenced the thin film surface morphology, resulting in varied wetting behaviour depending on the surface roughness.
Zitieren
APA
Hamid, M. R. Y., Ma'amor, D. A., & Hoong, A. P. D. O. B. (2022). Surface Wettability of ZnO Thin Films. Malaysian NANO-An International Journal. https://doi.org/10.22452/mnij.vol2no1.3
Vancouver
Hamid MRY, Ma'amor DA, Hoong APDOB. Surface Wettability of ZnO Thin Films. Malaysian NANO-An International Journal. 2022. doi:10.22452/mnij.vol2no1.3
BibTeX
@article{Hamid2022,
author = {Hamid, Mohd Rashid Yusof and Ma'amor, Dr. Azman and Hoong, Assoc. Prof. Dr. Ong Boon},
title = {Surface Wettability of ZnO Thin Films},
journal = {Malaysian NANO-An International Journal},
year = {2022},
doi = {10.22452/mnij.vol2no1.3}
}
EUVIMED