Development of Workflows for OTTV and U-Value of Roof Calculation Using BIM-VPL to Assess Envelopes Thermal Performance
Journal of Design and Built Environment · 29.12.2025 · 138-163
DOI: 10.22452/jdbe.vol25no3.7 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Design and Built Environment, online erschienen am 29.12.2025. Verfasst von Fatma Younis und 3 weiteren Autor:innen.
Abstract (Originalsprache)
Envelope thermal performance has been found to have a significant effect on a building's energy performance. In Malaysia, the Overall Thermal Transfer Value (OTTV) is a mandatory metric regulated by MS 1525:2019 to limit heat gain through façades. Conventional OTTV calculation is a manual, time-consuming process prone to human error, hindering rapid design iteration. This study offers a novel methodology to automate this process by developing integrated workflows that connect Building Information Modeling (BIM) with a Visual Programming Language (VPL). The proposed system will automatically extract essential thermal and physical properties from the BIM database and compute the OTTV and roof thermal transmittance (Ur) in accordance with the MS 1525:2019 formula. The workflows were rigorously validated through a comparative analysis with traditional manual calculations, utilizing both a controlled hypothetical model and real-world case studies of residential buildings. The results demonstrate that the proposed BIM-VPL system achieves a high degree of accuracy, with deviations of less than 0.6% for OTTV and under 1% for Ur, while concurrently reducing processing time by 70–80%. Equip designers with a robust, efficient tool to rapidly assess and optimize envelope designs, enhance material selection in early project stages, ensure compliance, and drive sustainable building development.
Zitieren
APA
Younis, F., Ismail, L. H., Wahab, I. B. A., & Al-awag, E. A. (2025). Development of Workflows for OTTV and U-Value of Roof Calculation Using BIM-VPL to Assess Envelopes Thermal Performance. Journal of Design and Built Environment, 138-163. https://doi.org/10.22452/jdbe.vol25no3.7
Vancouver
Younis F, Ismail LH, Wahab IBA, Al-awag EA. Development of Workflows for OTTV and U-Value of Roof Calculation Using BIM-VPL to Assess Envelopes Thermal Performance. Journal of Design and Built Environment. 2025:138-163. doi:10.22452/jdbe.vol25no3.7
BibTeX
@article{Younis2025,
author = {Younis, Fatma and Ismail, Lokman Hakim and Wahab, Izudinshah bin Abd and Al-awag, Eman Ali},
title = {Development of Workflows for OTTV and U-Value of Roof Calculation Using BIM-VPL to Assess Envelopes Thermal Performance},
journal = {Journal of Design and Built Environment},
year = {2025},
pages = {138--163},
doi = {10.22452/jdbe.vol25no3.7}
}
EUVIMED