EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Taguchi-based optimization of activation parameters in activated carbon production for water pollutant adsorption

I Gusti Agung Kade Suriadi, Dewa Ngakan Ketut Putra Negara, Tjokorda Gde Tirta Nindia, I Ketut Adi Atmika, I Gusti Komang Dwijana, I Made Gatot Karohika, Anak Agung Istri Agung Sri Komaladewi, Gopi Prasetiyo

SINERGI · 06.06.2026 · 30 (2) · 469-480

DOI: 10.22441/sinergi.2026.2.013 ↗

Kurz gefasst

Fachartikel in der Zeitschrift SINERGI, online erschienen am 06.06.2026. Verfasst von I Gusti Agung Kade Suriadi und 7 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Water pollution from synthetic dyes, particularly methylene blue (MB), is known to pose serious environmental and public health challenges. Therefore, among various treatment methods, adsorption using activated carbon remained the most cost-effective and energy-efficient. In this research, activated carbon was prepared from Petung bamboo (Dendrocalamus asper), with the Taguchi method used to optimize the activation parameters. The following three factors: activation temperature (700°C, 800°C), holding time (40 min, 80 min), and activating gas (N₂, CO₂) were investigated based on an L4(23) orthogonal array design. The characterization process included proximate analysis, functional group identification, amorphous structure determination, and surface morphology examination. Optimization using the larger-is-better signal-to-noise (SN) ratio model aimed to maximize methylene blue adsorption. Additionally, analysis of variance (ANOVA) showed that activating gas, holding time, and temperature contributed 48.69%, 34.86%, and 8.06%, respectively, to adsorption performance, and all three parameters had a statistically significant influence on methylene blue adsorption. The optimal conditions, namely 800°C activation temperature, 40 min holding time, and N₂ gas, produced a maximum adsorption capacity of 9.275 mg/g. As a result, these findings showed that activated carbon derived from Petung bamboo was a sustainable and renewable adsorbent, offering a promising pathway toward environmentally friendly and cost-effective wastewater treatment technologies.

Zitieren

APA

Suriadi, I. G. A. K., Negara, D. N. K. P., Nindia, T. G. T., Atmika, I. K. A., Dwijana, I. G. K., Karohika, I. M. G., Komaladewi, A. A. I. A. S., & Prasetiyo, G. (2026). Taguchi-based optimization of activation parameters in activated carbon production for water pollutant adsorption. SINERGI, 30(2), 469-480. https://doi.org/10.22441/sinergi.2026.2.013

Vancouver

Suriadi IGAK, Negara DNKP, Nindia TGT, Atmika IKA, Dwijana IGK, Karohika IMG, et al. Taguchi-based optimization of activation parameters in activated carbon production for water pollutant adsorption. SINERGI. 2026;30(2):469-480. doi:10.22441/sinergi.2026.2.013

BibTeX
@article{Suriadi2026,
  author = {Suriadi, I Gusti Agung Kade and Negara, Dewa Ngakan Ketut Putra and Nindia, Tjokorda Gde Tirta and Atmika, I Ketut Adi and Dwijana, I Gusti Komang and Karohika, I Made Gatot and Komaladewi, Anak Agung Istri Agung Sri and Prasetiyo, Gopi},
  title = {Taguchi-based optimization of activation parameters in activated carbon production for water pollutant adsorption},
  journal = {SINERGI},
  year = {2026},
  volume = {30},
  number = {2},
  pages = {469--480},
  doi = {10.22441/sinergi.2026.2.013}
}
Kostenlos starten →