EUVIMEDEUVIMED entdecken
Crossref

SISTEMAS DE POLIMENTO EM CIMENTOS IONÔMERO DE VIDRO: UMA ANÁLISE EXPERIMENTAL DA RUGOSIDADE E MANCHAMENTO SUPERFICIAL

Melissa Fofano Sutter, Thales Ribeiro de Magalhães Filho, Luise Gomes da Motta, Juliana Nunes da Silva Meirelles Dória Maia, Karin de Mello Weig

Revista Fluminense de Odontologia · 06.09.2027 · 2 (73) · 126-139

DOI: 10.22409/jsac0x11 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Revista Fluminense de Odontologia, online erschienen am 06.09.2027. Verfasst von Melissa Fofano Sutter und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study compared the roughness and surface staining of two glass ionomer cements (GIC), one conventional and one resin-modified, subjected to two polishing systems, aiming to evaluate the most adequate polishing protocol. Thirty specimens of each material were prepared and divided into three groups: 10 specimens polished with Praxis discs, 10 with the Microdont Mini Kit rubber polishing system, and 10 left unpolished as controls. Surface roughness was evaluated using a profilometer to obtain average roughness values. Colorimetric analysis involved coffee immersion of the specimens, with surface staining variation calculated using a spectrophotometer. The conventional GIC achieved the lowest roughness with the Mini Kit (Ra = 0.474 ± 0.195 μm) and the highest in the control group (Ra = 0.744 ± 0.138 μm). The resin-modified GIC also achieved its lowest roughness with the Mini Kit (Ra = 0.254 ± 0.098 μm), while the highest roughness was associated with the Praxis discs (Ra = 0.988 ± 0.378 μm). Regarding staining, the lowest ΔE values were recorded in the Mini Kit groups for both conventional GIC (ΔE = 3.1 ± 0.8) and resin-modified GIC (ΔE = 1.6 ± 0.3). The highest staining occurred in the Praxis disc groups, for both conventional GIC (ΔE = 4.3 ± 0.6) and resin-modified GIC (ΔE = 2.6 ± 0.3). Keywords: Glass Ionomer Cements; Dental Polishing; Surface Properties; Surface Roughness; Pigmentation

Zitieren

APA

Sutter, M. F., Filho, T. R. D. M., Motta, L. G. D., Maia, J. N. D. S. M. D., & Weig, K. D. M. (2027). SISTEMAS DE POLIMENTO EM CIMENTOS IONÔMERO DE VIDRO: UMA ANÁLISE EXPERIMENTAL DA RUGOSIDADE E MANCHAMENTO SUPERFICIAL. Revista Fluminense de Odontologia, 2(73), 126-139. https://doi.org/10.22409/jsac0x11

Vancouver

Sutter MF, Filho TRDM, Motta LGD, Maia JNDSMD, Weig KDM. SISTEMAS DE POLIMENTO EM CIMENTOS IONÔMERO DE VIDRO: UMA ANÁLISE EXPERIMENTAL DA RUGOSIDADE E MANCHAMENTO SUPERFICIAL. Revista Fluminense de Odontologia. 2027;2(73):126-139. doi:10.22409/jsac0x11

BibTeX
@article{Sutter2027,
  author = {Sutter, Melissa Fofano and Filho, Thales Ribeiro de Magalhães and Motta, Luise Gomes da and Maia, Juliana Nunes da Silva Meirelles Dória and Weig, Karin de Mello},
  title = {SISTEMAS DE POLIMENTO EM CIMENTOS IONÔMERO DE VIDRO: UMA ANÁLISE EXPERIMENTAL DA RUGOSIDADE E MANCHAMENTO SUPERFICIAL},
  journal = {Revista Fluminense de Odontologia},
  year = {2027},
  volume = {2},
  number = {73},
  pages = {126--139},
  doi = {10.22409/jsac0x11}
}
Kostenlos starten →