EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Photoluminescence-Based Real-Time Monitoring for Dimensional Characterization of Nanostructures Fabricated by Direct Laser Writing (DLW)

Edy Yulianto, Budi Suhendro, Marsetiayu Ningsih, Suroso, Agus Purbhadi, Vygantas Mizeikis

International Journal of Computational and Experimental Science and Engineering · 31.07.2026 · 12 (3)

DOI: 10.22399/ijcesen.5397 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Computational and Experimental Science and Engineering, online erschienen am 31.07.2026. Verfasst von Edy Yulianto und 5 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Real-time monitoring during nanostructure fabrication is essential to ensure fabrication accuracy and process reliability. In Direct Laser Writing (DLW), optical microscopy is commonly employed to observe the fabricate on process; however, it only provides visual images and cannot accurately determine the dimensions or geometry of the fabricated structures. This study proposes a photoluminescence (PL)-based monitoring technique for real-time dimensional characterization during DLW fabrication. The proposed method utilizes differences in PL intensity between polymerized nanostructures and the surrounding photoresist. By scanning a low-power laser probe through the fabrication region and recording the PL response, the shape and dimensions of embedded nanostructures can be reconstructed during fabrication. Experimental results demonstrate that the proposed PL-based monitoring technique can accurately reconstruct the geometry of fabricated structures. After compensation of systematic measurement errors, the average dimensional errors were reduced to 0.48 μm and 0.32 μm in the horizontal and vertical scanning directions, respectively. These results demonstrate the potential of the proposed technique as a non-destructive real-time monitoring method to improve the efficiency, accuracy, and reliability of DLW-based nanostructure fabrication.

Zitieren

APA

Yulianto, E., Suhendro, B., Ningsih, M., Suroso, Purbhadi, A., & Mizeikis, V. (2026). Photoluminescence-Based Real-Time Monitoring for Dimensional Characterization of Nanostructures Fabricated by Direct Laser Writing (DLW). International Journal of Computational and Experimental Science and Engineering, 12(3). https://doi.org/10.22399/ijcesen.5397

Vancouver

Yulianto E, Suhendro B, Ningsih M, Suroso, Purbhadi A, Mizeikis V. Photoluminescence-Based Real-Time Monitoring for Dimensional Characterization of Nanostructures Fabricated by Direct Laser Writing (DLW). International Journal of Computational and Experimental Science and Engineering. 2026;12(3). doi:10.22399/ijcesen.5397

BibTeX
@article{Yulianto2026,
  author = {Yulianto, Edy and Suhendro, Budi and Ningsih, Marsetiayu and Suroso and Purbhadi, Agus and Mizeikis, Vygantas},
  title = {Photoluminescence-Based Real-Time Monitoring for Dimensional Characterization of Nanostructures Fabricated by Direct Laser Writing (DLW)},
  journal = {International Journal of Computational and Experimental Science and Engineering},
  year = {2026},
  volume = {12},
  number = {3},
  doi = {10.22399/ijcesen.5397}
}
Kostenlos starten →