EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Impact of pre-treatment for coconut husk by water leaching on fuel and ash characteristics during combustion in a fluidized bed reactor

Thanet Unchaisri, Kaewjai Oechaiyaphum, Pawin Chaivatamaset, Waraporn Methawiriyasilp, Jaruwan Poosri

Asia-Pacific Journal of Science and Technology · 09.11.2026 · 31 (06)

DOI: 10.22299/apst.2026.285768 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Asia-Pacific Journal of Science and Technology, online erschienen am 09.11.2026. Verfasst von Thanet Unchaisri und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated the impact of water leaching of a coconut husk on improving fuel characteristics and preventing bed agglomeration in fluidized bed combustion. The leaching process was conducted in a laboratory-scale setup at water flow rates of 150 ml/min and 250 ml/min, and electrical conductivity (EC) was used to determine the optimum leaching duration. Potassium oxide decreased by up to 40%, chlorine by up to 82%, and ash content practically halved, reaching as low as 2.98% in the best case, as a result of the treatment. Importantly, the fuel’s heating value stayed around 20.5 MJ/kg. Physically, the leached husk exhibited a larger surface area and increased pore volume, corresponding to a rise in volatile matter from 65% to nearly 70%. During combustion tests at 800 °C, the treated coconut husk remained fluidized for much longer, up to 93 minutes, compared to just 32 minutes for the untreated fuel, indicating a strong reduction in bed agglomeration. The details of microscopic analysis revealed that leaching promoted the formation of compounds with higher melting points, thereby preventing the formation of low-melting-point potassium silicates that cause agglomeration. The FactSage program (version 8.2) was used for thermochemical modeling based on the ash composition, and the simulation results confirmed that the ash melting temperature increased from below 900 °C to above 1,300 °C after leaching. These results demonstrate that simple water leaching can effectively enhance the quality of coconut husk fuel and help prevent operational issues in fluidized bed combustors.

Zitieren

APA

Unchaisri, T., Oechaiyaphum, K., Chaivatamaset, P., Methawiriyasilp, W., & Poosri, J. (2026). Impact of pre-treatment for coconut husk by water leaching on fuel and ash characteristics during combustion in a fluidized bed reactor. Asia-Pacific Journal of Science and Technology, 31(06). https://doi.org/10.22299/apst.2026.285768

Vancouver

Unchaisri T, Oechaiyaphum K, Chaivatamaset P, Methawiriyasilp W, Poosri J. Impact of pre-treatment for coconut husk by water leaching on fuel and ash characteristics during combustion in a fluidized bed reactor. Asia-Pacific Journal of Science and Technology. 2026;31(06). doi:10.22299/apst.2026.285768

BibTeX
@article{Unchaisri2026,
  author = {Unchaisri, Thanet and Oechaiyaphum, Kaewjai and Chaivatamaset, Pawin and Methawiriyasilp, Waraporn and Poosri, Jaruwan},
  title = {Impact of pre-treatment for coconut husk by water leaching on fuel and ash characteristics during combustion in a fluidized bed reactor},
  journal = {Asia-Pacific Journal of Science and Technology},
  year = {2026},
  volume = {31},
  number = {06},
  doi = {10.22299/apst.2026.285768}
}
Kostenlos starten →