Thermal, morphological and mechanical properties of recycled Al film label /LLDPE composites
Asia-Pacific Journal of Science and Technology · 11.03.2026 · 31 (02)
DOI: 10.22299/apst.2026.282047 ↗Kurz gefasst
Fachartikel in der Zeitschrift Asia-Pacific Journal of Science and Technology, online erschienen am 11.03.2026. Verfasst von Siriwan Naknoy und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Plastic waste contaminated with aluminum film, particularly metallized film, was recognized as a severe environmental issue because it could not decompose naturally, leading to a long-lasting environmental presence with heavy metal contaminants. Therefore, effective management was required to address this problem. This study aimed to recycle metallized film into new materials to maximize its reusability by using linear low-density polyethylene (LLDPE) incorporated with metallized film at 5, 7.5, and 10 phr. The morphology, thermal properties, and thermal degradation of aluminum (Al) film were investigated. The results showed that the addition of aluminum film into the LLDPE matrix slightly increased the melting point due to the effect of the third polymer component and the presence of aluminum particles in the blend. The melt flow index (MFI) of LLDPE with 5, 7.5, and 10 phr aluminum film significantly decreased because the aluminum particles restricted molecular chain mobility, resulting in lower flowability. Furthermore, phase separation of the polymer was observed after the addition of aluminum film into the LLDPE matrix. In addition, the mechanical property results showed that the tensile strength and modulus decreased, whereas the elasticity increased due to the presence of the Al film layer within the LLDPE matrix.
Zitieren
APA
Naknoy, S., Charoeythornkhajhornchai, P., & Laoong-u-thai, Y. (2026). Thermal, morphological and mechanical properties of recycled Al film label /LLDPE composites. Asia-Pacific Journal of Science and Technology, 31(02). https://doi.org/10.22299/apst.2026.282047
Vancouver
Naknoy S, Charoeythornkhajhornchai P, Laoong-u-thai Y. Thermal, morphological and mechanical properties of recycled Al film label /LLDPE composites. Asia-Pacific Journal of Science and Technology. 2026;31(02). doi:10.22299/apst.2026.282047
BibTeX
@article{Naknoy2026,
author = {Naknoy, Siriwan and Charoeythornkhajhornchai, Pollawat and Laoong-u-thai, Yanisa},
title = {Thermal, morphological and mechanical properties of recycled Al film label /LLDPE composites},
journal = {Asia-Pacific Journal of Science and Technology},
year = {2026},
volume = {31},
number = {02},
doi = {10.22299/apst.2026.282047}
}
EUVIMED