EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Effect of Paraffinic Oil Plasticizer Addition on Kinetics of Rubber Vulcanization Based on Kamal-Sorour and Deng-Isayev Models

Andri Saputra, Hersandy Dayu Kusuma, Mertza Fitra Agustian, Syaifa Eza Satria, Danuraja Ilmannafia

Asia-Pacific Journal of Science and Technology · 25.05.2026 · 31 (03)

DOI: 10.22299/apst.2026.271422 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Asia-Pacific Journal of Science and Technology, online erschienen am 25.05.2026. Verfasst von Andri Saputra und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Plasticizer is an essential component in rubber compounding, characterized by the ability to reduce compound viscosity, improve the dispersion of additives, and significantly affect processing efficiency and vulcanization kinetics. Therefore, this study aimed to investigate the vulcanization kinetics of styrene butadiene rubber (SBR) with varying amounts of paraffinic oil plasticizer. The experimental procedures included mixing rubber and additives, followed by compound testing using a rheometer. The kinetic parameters of the Deng-Isayev and Kamal-Sorour models were determined using the sum of squared error (SSE) optimization of the rheological data. The results showed that increasing the vulcanization temperature and reducing plasticizer content caused a decrease in induction time (ts2) and optimum vulcanization time (tc90). Furthermore, the experimental data were accurately modeled using the Kamal-Sorour model. The vulcanization reaction occurred concurrently with the predominance of the autocatalysis mechanism (k2 > k1), while the values of m and n were inversely proportional to the amount of plasticizer. The vulcanization reaction was primarily influenced by the initial reactant compound rather than the catalytic effect on the product reaction (n > m), showing that high plasticizer content increased energy requirement (E2 > E1) for autocatalytic reactions.

Zitieren

APA

Saputra, A., Kusuma, H. D., Agustian, M. F., Satria, S. E., & Ilmannafia, D. (2026). Effect of Paraffinic Oil Plasticizer Addition on Kinetics of Rubber Vulcanization Based on Kamal-Sorour and Deng-Isayev Models. Asia-Pacific Journal of Science and Technology, 31(03). https://doi.org/10.22299/apst.2026.271422

Vancouver

Saputra A, Kusuma HD, Agustian MF, Satria SE, Ilmannafia D. Effect of Paraffinic Oil Plasticizer Addition on Kinetics of Rubber Vulcanization Based on Kamal-Sorour and Deng-Isayev Models. Asia-Pacific Journal of Science and Technology. 2026;31(03). doi:10.22299/apst.2026.271422

BibTeX
@article{Saputra2026,
  author = {Saputra, Andri and Kusuma, Hersandy Dayu and Agustian, Mertza Fitra and Satria, Syaifa Eza and Ilmannafia, Danuraja},
  title = {Effect of Paraffinic Oil Plasticizer Addition on Kinetics of Rubber Vulcanization Based on Kamal-Sorour and Deng-Isayev Models},
  journal = {Asia-Pacific Journal of Science and Technology},
  year = {2026},
  volume = {31},
  number = {03},
  doi = {10.22299/apst.2026.271422}
}
Kostenlos starten →