EUVIMEDEUVIMED entdecken
Crossref

Design and Development of an Arduino-Based Autonomous Fire Fighter Robot

Aakriti Kumari, Vishnupriya Kumari, Chhoti Kumari, Mansha Kumari, Er. Shwetabh, Ankita Sinha, Arpita Kumari ,

International Journal for Research in Applied Science and Engineering Technology · 31.10.2026 · 14 (10) · 2151-2160

DOI: 10.22214/ijraset.2026.85516 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal for Research in Applied Science and Engineering Technology, online erschienen am 31.10.2026. Verfasst von Aakriti Kumari und 6 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fire incidents can expose people to high temperatures, smoke, and other hazards. This paper presents the design and operating principle of a compact Arduino-based fire fighter robot developed as an educational prototype for flame detection, directional movement, and water spraying. The project uses three flame sensors positioned to observe the left, front, and right directions; an Arduino UNO as the main controller; an L298 motor driver; four BO geared DC motors; a servo-operated nozzle; and a small water pump supplied from an onboard tank. Sensor readings are processed by the controller to select a movement response. When a flame is detected, the robot stops or turns according to the programmed thresholds, positions the nozzle, and activates the pump. Related work has examined Arduino-based firefighting robots, multi-robot assistance, and sensor-fusionbased fire detection [1], [7]–[9], [11]. The controller and motor-driver choices are supported by the relevant hardware documentation [2], [3], while the sensor-reading method uses Arduino’s analog input functionality [12]. No quantitative experimental results were provided; therefore, detection range, response time, extinguishing time, success rate, and battery endurance are not claimed. The robot is an educational demonstrator, not a certified firefighting appliance, and must not be used on structural, electrical, chemical, or spreading fires.

Zitieren

APA

Kumari, A., Kumari, V., Kumari, C., Kumari, M., Shwetabh, E., Sinha, A., & ,, A. K. (2026). Design and Development of an Arduino-Based Autonomous Fire Fighter Robot. International Journal for Research in Applied Science and Engineering Technology, 14(10), 2151-2160. https://doi.org/10.22214/ijraset.2026.85516

Vancouver

Kumari A, Kumari V, Kumari C, Kumari M, Shwetabh E, Sinha A, et al. Design and Development of an Arduino-Based Autonomous Fire Fighter Robot. International Journal for Research in Applied Science and Engineering Technology. 2026;14(10):2151-2160. doi:10.22214/ijraset.2026.85516

BibTeX
@article{Kumari2026,
  author = {Kumari, Aakriti and Kumari, Vishnupriya and Kumari, Chhoti and Kumari, Mansha and Shwetabh, Er. and Sinha, Ankita and ,, Arpita Kumari},
  title = {Design and Development of an Arduino-Based Autonomous Fire Fighter Robot},
  journal = {International Journal for Research in Applied Science and Engineering Technology},
  year = {2026},
  volume = {14},
  number = {10},
  pages = {2151--2160},
  doi = {10.22214/ijraset.2026.85516}
}
Kostenlos starten →