SIMULATION AND ANALYSIS OF SPRAY DISTRIBUTION AND DROPLET SIZE OF LARGE SPRINKLER MACHINES LOADED WITH ATOMIZING MICRO-SPRINKLERS
Facta Universitatis, Series: Mechanical Engineering · 30.04.2026 · 24 (1) · 137
DOI: 10.22190/fume241203017c ↗Kurz gefasst
Fachartikel in der Zeitschrift Facta Universitatis, Series: Mechanical Engineering, online erschienen am 30.04.2026. Verfasst von Hua Cao und 6 weiteren Autor:innen.
Abstract (Originalsprache)
Current agricultural spraying faces issues such as excessive application, pesticide waste, and environmental pollution. This paper analyzes the hydraulic performance of several atomizing micro-sprayers (hollow cone, solid cone, and fan-shaped) used in large-scale irrigation machines, providing a theoretical basis for selecting spraying nozzles. Three types of micro-sprayers were tested at pressures of 0.2MPa, 0.3MPa, and 0.5MPa, and ground heights of 0.5m, 0.8m, 1.2m, and 1.5m. Each test was repeated three times. The results show that: (1) The hollow cone sprayer has a bimodal water distribution, the solid cone is unimodal, and the fan-shaped sprayer is long-strip shaped. As pressure increases, water distribution increases, while height increases reduce water distribution. (2) The droplet size distribution follows a normal distribution. Higher pressure increases the number of larger droplets, while lower pressure increases smaller droplets. Larger aperture sprayers generate more droplets, with the fan-shaped sprayer producing the most. (3) The particle size of the hollow cone sprayer ranges from 0.312mm to 1.187mm, with speeds below 1.4m/s; the solid cone sprayer ranges from 0.312mm to 6.5mm, with speeds below 2.4m/s; and the fan-shaped sprayer ranges from 0.312mm to 2.75mm, with speeds below 2.5m/s. The experimental results provide a theoretical basis for selecting and using atomizing micro-sprayers in large-scale irrigation, offering guidance for reducing pesticide use and improving agricultural efficiency.
Zitieren
APA
Cao, H., Fan, Y., Ma, C., Li, P., Zhan, W., Cao, Y., & Duan, F. (2026). SIMULATION AND ANALYSIS OF SPRAY DISTRIBUTION AND DROPLET SIZE OF LARGE SPRINKLER MACHINES LOADED WITH ATOMIZING MICRO-SPRINKLERS. Facta Universitatis, Series: Mechanical Engineering, 24(1), 137. https://doi.org/10.22190/fume241203017c
Vancouver
Cao H, Fan Y, Ma C, Li P, Zhan W, Cao Y, et al. SIMULATION AND ANALYSIS OF SPRAY DISTRIBUTION AND DROPLET SIZE OF LARGE SPRINKLER MACHINES LOADED WITH ATOMIZING MICRO-SPRINKLERS. Facta Universitatis, Series: Mechanical Engineering. 2026;24(1):137. doi:10.22190/fume241203017c
BibTeX
@article{Cao2026,
author = {Cao, Hua and Fan, Yongshen and Ma, Chunya and Li, Peng and Zhan, Wei and Cao, Yinbo and Duan, Fuyi},
title = {SIMULATION AND ANALYSIS OF SPRAY DISTRIBUTION AND DROPLET SIZE OF LARGE SPRINKLER MACHINES LOADED WITH ATOMIZING MICRO-SPRINKLERS},
journal = {Facta Universitatis, Series: Mechanical Engineering},
year = {2026},
volume = {24},
number = {1},
pages = {137},
doi = {10.22190/fume241203017c}
}
EUVIMED