EUVIMEDEUVIMED entdecken
Crossref

Analysis of Power Generation using Waste Heat in Industries using Thermoelectric Generator

Dr. Shubhangi Gondane, Priyanshu Watari, Niraj Borkar, Niteshgiree Paramanandigiree, Pavan Dhongade, Pawan Nagpure, Rohit Wanjari

International Journal of Advanced Engineering Research and Science · 2023 · 10 (5) · 114-119

DOI: 10.22161/ijaers.105.16 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Advanced Engineering Research and Science, 2023. Verfasst von Dr. Shubhangi Gondane und 6 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recently, increased emphasis has been placed on the global issue of rapid economic growth, a relative energy scarcity, internal combustion engine exhaust waste heat, and environmental degradation. About 30 to 40 percent of the total heat delivered to the engine in the form of fuel is transformed into meaningful mechanical work. It is necessary to convert waste heat into usable work since the leftover heat is released into the environment through exhaust gases and engine cooling systems, leading to an increase in entropy and major environmental degradation. Due to the specific advantages of thermoelectric generators, they have emerged as a possible alternative green technology as waste heat recovering techniques like the thermoelectric generator (TEG) are developed. A techniquethat can directly convert the thermal energy found in exhaust gas into electric power is the subject of the majority of current study. In this research, a thermoelectric power generator based on exhaust gas was developed for industrial use. The exhaust gases in the pipe serve as the thermoelectric power generator's heat source. As a result, this study suggests and puts into practice a thermoelectric waste heat energy recovery system using the exhaust heat from running equipment. The goal of the project is to directly transform the heat energy from vehicle waste heat to electrical energy using a thermoelectric generator. Although the largest amount of electric power produced by such a system is just 10 W from a single TEG module, significant advancements in material science can make the ambitious aim of generating larger wattages by any means a real possibility.

Zitieren

APA

Gondane, D. S., Watari, P., Borkar, N., Paramanandigiree, N., Dhongade, P., Nagpure, P., & Wanjari, R. (2023). Analysis of Power Generation using Waste Heat in Industries using Thermoelectric Generator. International Journal of Advanced Engineering Research and Science, 10(5), 114-119. https://doi.org/10.22161/ijaers.105.16

Vancouver

Gondane DS, Watari P, Borkar N, Paramanandigiree N, Dhongade P, Nagpure P, et al. Analysis of Power Generation using Waste Heat in Industries using Thermoelectric Generator. International Journal of Advanced Engineering Research and Science. 2023;10(5):114-119. doi:10.22161/ijaers.105.16

BibTeX
@article{Gondane2023,
  author = {Gondane, Dr. Shubhangi and Watari, Priyanshu and Borkar, Niraj and Paramanandigiree, Niteshgiree and Dhongade, Pavan and Nagpure, Pawan and Wanjari, Rohit},
  title = {Analysis of Power Generation using Waste Heat in Industries using Thermoelectric Generator},
  journal = {International Journal of Advanced Engineering Research and Science},
  year = {2023},
  volume = {10},
  number = {5},
  pages = {114--119},
  doi = {10.22161/ijaers.105.16}
}
Kostenlos starten →