EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Review of Current Trends, Materials and Challenges in 3D Printing for Biomedical Applications Using Polylactic Acid

Dwi Hadi Sulistyarini Suistyarini, Effendi Mohamad1, Mohd Rizal Alkhari, Muhammad Ilman Hakimi Chua Abdullah, Teruaki Ito, Arfauz A Rahman

Al-Khwarizmi Engineering Journal · 01.06.2026 · 22 (2) · 32-53

DOI: 10.22153/kej.2026.04.002 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Al-Khwarizmi Engineering Journal, online erschienen am 01.06.2026. Verfasst von Dwi Hadi Sulistyarini Suistyarini und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polylactic acid (PLA) is a widely used biomaterial in additive manufacturing (AM) because of its biodegradable and biocompatible nature and availability. Hence, this study focuses on the importance of PLA in biomedical applications such as personalised medicine, tissue engineering, drug delivery and customised implants and explores the possibility of PLA-based biomedical products. Different AM technologies, such as fused deposition modelling, stereolithography, and selective laser sintering, and their possible uses with PLA are presented. Apart from pure PLA, the use of composite materials based on PLA is important, as these materials can improve mechanical and biological properties, which are highly desirable for various clinical applications. Several critical issues, such as material properties, resolution, regulatory affairs, biodegradability and sustainability, are examined and discussed. In addition, the potential of PLA-based 3D printing technologies, including multimaterial 3D printing and bioprinting for biomedical applications, is explored

Zitieren

APA

Suistyarini, D. H. S., Mohamad1, E., Alkhari, M. R., Abdullah, M. I. H. C., Ito, T., & Rahman, A. A. (2026). Review of Current Trends, Materials and Challenges in 3D Printing for Biomedical Applications Using Polylactic Acid. Al-Khwarizmi Engineering Journal, 22(2), 32-53. https://doi.org/10.22153/kej.2026.04.002

Vancouver

Suistyarini DHS, Mohamad1 E, Alkhari MR, Abdullah MIHC, Ito T, Rahman AA. Review of Current Trends, Materials and Challenges in 3D Printing for Biomedical Applications Using Polylactic Acid. Al-Khwarizmi Engineering Journal. 2026;22(2):32-53. doi:10.22153/kej.2026.04.002

BibTeX
@article{Suistyarini2026,
  author = {Suistyarini, Dwi Hadi Sulistyarini and Mohamad1, Effendi and Alkhari, Mohd Rizal and Abdullah, Muhammad Ilman Hakimi Chua and Ito, Teruaki and Rahman, Arfauz A},
  title = {Review of Current Trends, Materials and Challenges in 3D Printing for Biomedical Applications Using Polylactic Acid},
  journal = {Al-Khwarizmi Engineering Journal},
  year = {2026},
  volume = {22},
  number = {2},
  pages = {32--53},
  doi = {10.22153/kej.2026.04.002}
}
Kostenlos starten →