EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Characterization and mechanical properties of biocomposite of cantula fiber reinforced nano-ha/magnesium/shellac for bone screw material

Joko Triyono, Dea Pawestry Utami, Wijang Wisnu Rahardjo, Fransiskus Bima Widi Nugroho

Jurnal Teknosains · 2025

DOI: 10.22146/teknosains.106420 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Teknosains, 2025. Verfasst von Joko Triyono und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Accidents are a major cause of fractures in Indonesia. One of treatments for fractures is bone screws with support plates that are placed on broken bone. Currently, many biomaterials for bone screws are being developed which have biodegradable properties so that post-operative bone healing is not required. The purpose of this study was to determine the effect of cantula fiber addition on tensile strength, wear rate, and crystallinity of nano-HA/magnesium/Shellac biocomposite for bone screw materials. Nano-HA/magnesium/Shellac/cantula fiber materials were mixed using a blender. The material was mixed with a magnesium/hydroxyapatite ratio of 70/30 and cantula fiber is added with variations of 0%, 10%, 20% and 30% of total volume. After that, the material mixture was compacted with a pressure of 300 MPa for 10 minutes. Then the sintering process was carried out at a temperature of 140 ̊C for two hours. The results showed that the highest tensile strength value was 7.86 MPa at 30% variation. The lowest wear rate was 0.31 x 10-3 mm3/Nm at 30% variation. The highhest crystallinity in XRD observations was obtained at 30% variation, which was 79.65%.

Zitieren

APA

Triyono, J., Utami, D. P., Rahardjo, W. W., & Nugroho, F. B. W. (2025). Characterization and mechanical properties of biocomposite of cantula fiber reinforced nano-ha/magnesium/shellac for bone screw material. Jurnal Teknosains. https://doi.org/10.22146/teknosains.106420

Vancouver

Triyono J, Utami DP, Rahardjo WW, Nugroho FBW. Characterization and mechanical properties of biocomposite of cantula fiber reinforced nano-ha/magnesium/shellac for bone screw material. Jurnal Teknosains. 2025. doi:10.22146/teknosains.106420

BibTeX
@article{Triyono2025,
  author = {Triyono, Joko and Utami, Dea Pawestry and Rahardjo, Wijang Wisnu and Nugroho, Fransiskus Bima Widi},
  title = {Characterization and mechanical properties of biocomposite of cantula fiber reinforced nano-ha/magnesium/shellac for bone screw material},
  journal = {Jurnal Teknosains},
  year = {2025},
  doi = {10.22146/teknosains.106420}
}
Kostenlos starten →