EUVIMEDEUVIMED entdecken
Crossref

The Effect of Niobium Addition on Mechanical Properties and Corrosion Resistance of a Medical Grade SS316L

I Nyoman Jujur, Sri Endah Susilowati, Seto Roseno, Agus Hadi Santosa Wargadipura

ASEAN Journal of Chemical Engineering · 30.12.2021 · 21 (2) · 178

DOI: 10.22146/ajche.63778 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ASEAN Journal of Chemical Engineering, online erschienen am 30.12.2021. Verfasst von I Nyoman Jujur und 3 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To improve mechanical properties, especially elongation, of as-cast medical grade 316L stainless steel, niobium (Nb) was introduced into the alloys, followed by solution heat treatment. Alloying was performed using a 250 kg air induction melting furnace with duplex raw materials and ferronickel. Heat treatment using a solution at 1040 oC, with a holding time of 45 minutes, and water quenching was used. The sample was tested using hardness and ultimate tensile machines. Corrosion tests with simulated body fluids were carried out using media with similar corrosion conditions to human blood. Microstructure observations were performed optically. The results show that the addition of Nb increases the hardness of medical grade 316L stainless steel by 6% compared to the unalloyed steel, both before and after heat treatment. The addition of Nb increases the tensile strength by 8% compared to non-heat treated steel and increases the elongation before and after heat treatment by 8% and 5%, respectively. However, the corrosion rate of the material with Nb is higher than without the addition of Nb. Nb as a carbide former improves the mechanical properties of medical grade 316L stainless steel but adversely affects its corrosion resistance

Zitieren

APA

Jujur, I. N., Susilowati, S. E., Roseno, S., & Wargadipura, A. H. S. (2021). The Effect of Niobium Addition on Mechanical Properties and Corrosion Resistance of a Medical Grade SS316L. ASEAN Journal of Chemical Engineering, 21(2), 178. https://doi.org/10.22146/ajche.63778

Vancouver

Jujur IN, Susilowati SE, Roseno S, Wargadipura AHS. The Effect of Niobium Addition on Mechanical Properties and Corrosion Resistance of a Medical Grade SS316L. ASEAN Journal of Chemical Engineering. 2021;21(2):178. doi:10.22146/ajche.63778

BibTeX
@article{Jujur2021,
  author = {Jujur, I Nyoman and Susilowati, Sri Endah and Roseno, Seto and Wargadipura, Agus Hadi Santosa},
  title = {The Effect of Niobium Addition on Mechanical Properties and Corrosion Resistance of a Medical Grade SS316L},
  journal = {ASEAN Journal of Chemical Engineering},
  year = {2021},
  volume = {21},
  number = {2},
  pages = {178},
  doi = {10.22146/ajche.63778}
}
Kostenlos starten →