EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Adsorption of CO₂ with Thermally Activated Serpentine: Experimental and CFD Simulations in a Fixed-bed Reactor

Alvan Ade Reza, Mahidin Mahidin, Yunardi Yunardi, Asri Gani, Sari Wardani

ASEAN Journal of Chemical Engineering · 30.04.2026 · 26 (1) · 183-194

DOI: 10.22146/ajche.24963 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ASEAN Journal of Chemical Engineering, online erschienen am 30.04.2026. Verfasst von Alvan Ade Reza und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thermally activated serpentine, abundant in Mg-silicate, shows potential for CO₂ extraction using mineral carbonation. This study aims to evaluate the performance of thermally activated serpentine for CO₂ capture in a fixed-bed reactor by combining breakthrough experiments with CFD simulations. The serpentine was thermally activated at 750 °C for 1.5 hours. CO₂ adsorption using three gas flow rates (0.1, 0.5, and 1.0 SLPM) with two variations of adsorbent mass (15 g and 30 g). The results show that the thermal activation of serpentine surface area, micro-porosity, and Mg content, thereby significantly enhancing the material’s capacity and adsorption rate. The breakthrough curve shows that at a flow rate of 0.1 SLPM, the CO₂ capture capacity is 2.81 mg/g, while a at 0.5 SLPM, it provides a good balance between adsorption rate and capacity. Conversely, at 1.0 SLPM, the process is limited by transport, resulting in a steeper, faster breakthrough curve. Kinetic modeling revealed that the Clark and Yoon-Nelson models were better suited to describing the experimental data than Thomas model (R² > 0.99). The integrated experimental and simulation approach provides a strong quantitative basis for predictive design and scale-up of fixed-bed reactors for CO₂ capture. Overall, thermally activated serpentine has proven to be an effective sorbent for CO₂ capture in gas-solid systems, and the validated CFD model provides valuable insights for more efficient reactor design and optimization of operational conditions at an industrial scale.

Zitieren

APA

Reza, A. A., Mahidin, M., Yunardi, Y., Gani, A., & Wardani, S. (2026). Adsorption of CO₂ with Thermally Activated Serpentine: Experimental and CFD Simulations in a Fixed-bed Reactor. ASEAN Journal of Chemical Engineering, 26(1), 183-194. https://doi.org/10.22146/ajche.24963

Vancouver

Reza AA, Mahidin M, Yunardi Y, Gani A, Wardani S. Adsorption of CO₂ with Thermally Activated Serpentine: Experimental and CFD Simulations in a Fixed-bed Reactor. ASEAN Journal of Chemical Engineering. 2026;26(1):183-194. doi:10.22146/ajche.24963

BibTeX
@article{Reza2026,
  author = {Reza, Alvan Ade and Mahidin, Mahidin and Yunardi, Yunardi and Gani, Asri and Wardani, Sari},
  title = {Adsorption of CO₂ with Thermally Activated Serpentine: Experimental and CFD Simulations in a Fixed-bed Reactor},
  journal = {ASEAN Journal of Chemical Engineering},
  year = {2026},
  volume = {26},
  number = {1},
  pages = {183--194},
  doi = {10.22146/ajche.24963}
}
Kostenlos starten →