Removal of Chloride in Saline Water by Bismuth Oxide Nanoparticles
ASEAN Journal of Chemical Engineering · 30.04.2026 · 26 (1) · 59-70
DOI: 10.22146/ajche.20270 ↗Kurz gefasst
Fachartikel in der Zeitschrift ASEAN Journal of Chemical Engineering, online erschienen am 30.04.2026. Verfasst von Trung Thanh Nguyen und 8 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
Climate change intensifies saltwater intrusion in coastal and delta regions, notably the Mekong Delta, thereby increasing the concentration of chloride ions (Cl-) in water. Elevated Cl- concentrations pose serious environmental challenges, inhibiting plant growth and impacting human health. While various conventional methods for chloride treatment exist, challenges persist concerning high cost, complex procedures, and secondary waste. Therefore, developing a simple, cost-effective, and highly efficient method using novel adsorbent materials is imperative. The primary objective of this study was to prepare and evaluate the efficacy of bismuth oxide nanoparticles (Bi2O3) as a novel, highly effective adsorbent for the removal of Cl- from saline water sources. Bi2O3 nanoparticles were synthesized using the solid dispersion evaporation technique with sorbitol as a support. FTIR, XRD, SEM, and EDX were used to characterize the physicochemical and structural properties of the material. The Cl- removal capacity was systematically studied under diverse operational conditions, including contact time, solution pH, adsorbent dosage, initial Cl- concentration, and temperature, to determine appropriate adsorption conditions. The material was also subjected to adsorption-desorption cycling tests to evaluate its regeneration potential and long-term durability. The kinetic study showed that the Bi2O3 material reached adsorption equilibrium efficiently after 90 minutes. The maximum Cl- adsorption capacity was 40.89 mg/g at an optimum solution pH of 4, under optimized conditions (initial Cl- concentration of 50 mg/L, 25 °C). Other investigated factors significantly influenced the adsorption kinetics and capacity. Crucially, the Bi2O3 adsorbent maintained its high removal efficiency over 10 regeneration cycles, confirming its excellent durability and potential for real-world applications. The results clearly demonstrate that the synthesized Bi2O3 nanoparticles have excellent potential as a robust, high-performing adsorbent for Cl- removal, suggesting a viable and practical solution to the challenges posed by saltwater intrusion.
Zitieren
APA
Nguyen, T. T., Le, T. T., Thi, T. N., Hue, H. L., Le, T. T., Padungthon, S., Phan, P. T., Thi, Q. A. N., & Nguyen, N. H. (2026). Removal of Chloride in Saline Water by Bismuth Oxide Nanoparticles. ASEAN Journal of Chemical Engineering, 26(1), 59-70. https://doi.org/10.22146/ajche.20270
Vancouver
Nguyen TT, Le TT, Thi TN, Hue HL, Le TT, Padungthon S, et al. Removal of Chloride in Saline Water by Bismuth Oxide Nanoparticles. ASEAN Journal of Chemical Engineering. 2026;26(1):59-70. doi:10.22146/ajche.20270
BibTeX
@article{Nguyen2026,
author = {Nguyen, Trung Thanh and Le, Thanh Thien and Thi, Thuy Nguyen and Hue, Ho Lien and Le, Tri Thich and Padungthon, Surapol and Phan, Phuoc Toan and Thi, Quynh Anh Nguyen and Nguyen, Nhat Huy},
title = {Removal of Chloride in Saline Water by Bismuth Oxide Nanoparticles},
journal = {ASEAN Journal of Chemical Engineering},
year = {2026},
volume = {26},
number = {1},
pages = {59--70},
doi = {10.22146/ajche.20270}
}
EUVIMED