EUVIMEDEUVIMED entdecken
Crossref

STUDY ON STIFFNESS COEFFICIENT OF HEADED STUD FOR ESTABLISHING THE DESIGN METHOD OF FLEXIBLE COMPOSITE GIRDER WITH PRECAST CONCRETE SLAB

Tetsumi NAKAMURA, Yusuke IMAGAWA, Kazuo OGAKI, Hayao KOBAYASHI, Toshiyuki ISHIKAWA, Takamasa FUJIMOTO, 将樹 岩井, Nobuhito OKUBO

Japanese Journal of JSCE · 2026 · 82 (14) · n/a

DOI: 10.2208/jscejj.25-14002 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Japanese Journal of JSCE, 2026. Verfasst von Tetsumi NAKAMURA und 7 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In Japan, the replacement of damaged RC slabs with precast PC slabs has been increasingly adopted in the rehabilitation of steel girder bridges. Under such renewal projects, the number of headed studs that can be arranged in pocket for shear connector of precast slabs is often limited, and therefore flexible composite girder design, which allows a reduction in the number of studs, has attracted considerable attention. In establishing a flexible composite girder design considering the slip behavior of shear connectors, the appropriate evaluation of shear connector stiffness (flexibility constant) is essential, and the stiffness coefficient per headed stud, corresponding to the initial stiffness, must be properly determined. In this study, a series of static push-out tests was conducted using various specimens with different adjustment mortar thicknesses and types of headed studs as test parameters. Furthermore, in flexible composite girders with a reduced number of studs, a decrease in shear capacity and slip stiffness due to fatigue damage is a potential concern. Therefore, the horizontal shear force induced by moving live loads was analytically evaluated, and cyclic loading based on the analytical results was applied to the specimens. Push-out tests were then performed after cyclic loading to investigate the effects of repeated loading on the shear behavior of headed studs. The experimental results provide fundamental data for evaluating the slip stiffness and fatigue performance of headed studs used in flexible composite girder design with precast PC slabs.

Zitieren

APA

NAKAMURA, T., IMAGAWA, Y., OGAKI, K., KOBAYASHI, H., ISHIKAWA, T., FUJIMOTO, T., 岩井, 将., & OKUBO, N. (2026). STUDY ON STIFFNESS COEFFICIENT OF HEADED STUD FOR ESTABLISHING THE DESIGN METHOD OF FLEXIBLE COMPOSITE GIRDER WITH PRECAST CONCRETE SLAB. Japanese Journal of JSCE, 82(14), n/a. https://doi.org/10.2208/jscejj.25-14002

Vancouver

NAKAMURA T, IMAGAWA Y, OGAKI K, KOBAYASHI H, ISHIKAWA T, FUJIMOTO T, et al. STUDY ON STIFFNESS COEFFICIENT OF HEADED STUD FOR ESTABLISHING THE DESIGN METHOD OF FLEXIBLE COMPOSITE GIRDER WITH PRECAST CONCRETE SLAB. Japanese Journal of JSCE. 2026;82(14):n/a. doi:10.2208/jscejj.25-14002

BibTeX
@article{NAKAMURA2026,
  author = {NAKAMURA, Tetsumi and IMAGAWA, Yusuke and OGAKI, Kazuo and KOBAYASHI, Hayao and ISHIKAWA, Toshiyuki and FUJIMOTO, Takamasa and 岩井, 将樹 and OKUBO, Nobuhito},
  title = {STUDY ON STIFFNESS COEFFICIENT OF HEADED STUD FOR ESTABLISHING THE DESIGN METHOD OF FLEXIBLE COMPOSITE GIRDER WITH PRECAST CONCRETE SLAB},
  journal = {Japanese Journal of JSCE},
  year = {2026},
  volume = {82},
  number = {14},
  pages = {n/a},
  doi = {10.2208/jscejj.25-14002}
}
Kostenlos starten →